I-High Quality Interface Converter Rs232 - E1-31 Channel RS232/RS422/RS485 Converter JHA-CE1D31/R31/Q31 – JHA

I-E1-31 Channel RS232/RS422/RS485 ConverterJHA-CE1D31/R31/Q31

Uhlolojikelele

Lesi siguquli esibonakalayo sisekelwe ku-FPGA, sihlinzeka nge-31Channel RS232/485/422 ngokudluliswa kwe-E1 interface. Umkhiqizo unqamula ukungqubuzana phakathi kwebanga lokuxhumana le-serial interface yendabuko kanye nezinga lokuxhumana, ngaphandle kwalokho, futhi ungaxazulula ukuphazamiseka kukazibuthe, ukuphazamiseka kwendandatho yaphansi kanye nokulimala kombani. Idivayisi ithuthukisa kakhulu ukuthembeka, ukuphepha kanye nokugcinwa kuyimfihlo kokuxhumana kwedatha. Isetshenziswa kabanzi ekulawuleni izimboni ezahlukahlukene, ukulawulwa kwenqubo kanye nezikhathi zokulawulwa kwethrafikhi, ikakhulukazi eBhange, namandla kanye neminye imikhakha nezinhlelo ezinezidingo ezikhethekile zokuphazanyiswa kwemvelo kazibuthe. Isiteshi se-RS232/RS485/RS422 singadlulisela idatha ye-serial eguquguqukayo ngokuhambisana nesilinganiso se-baud esingu-0Kbps-14400bps.

Isithombe Somkhiqizo

19inch 1U uhlobo

Izici

• Ngokusekelwe ku-IC ye-self-copyright
• Sekela ulayini ongu-3 RS232 (TXD,RXD,GND), ukusekelwa kwe-CD yokulawula ukugeleza, i-DSR, i-CTS
• Iba ne-Loop Back Mode emithathu: i-E1 interface Loop Back (ANA),I-RS232/485/422 interface Loop Back(DIG),Yala i-RS232/485/422 interface Loop Back(REM)
• I-RS232/RS485/RS422 isekela ipulaki eshisayo, isekela uxhumano lwedivayisi ye-DTE noma ye-DCE
• Isiteshi se-RS232/RS485/RS422 singadlulisela idatha ye-serial eguquguqukayo ngokulinganayo 0Kbps-14400bps izinga le-baud
• Yiba nomsebenzi wokuhlola wekhodi okungahleliwe mbumbulu, ulayini ovulwe kalula, ungasetshenziswa njengesihloli se-2M BER
• Isixhumi esibonakalayo se-serial port umbani-ukuvikela kufinyelele ku-IEC61000-4-5 (8/20μS) DM(Imodi Ehlukile): 6KV, Impedance (2 Ohm), CM(Imodi Ejwayelekile): 6KV, Impedance (2 Ohm) ejwayelekile
• Nikeza ama-impedances angu-2: 75 Ohm ukungalingani kanye nebhalansi engu-120 Ohm;
• Ingenza i-E1 serial converter (A) — E1 fibre optic Modem (B) — i-fiber serial Modem (C) topology
• I-AC 220V, DC-48V, DC+24V, DC Power and Polarity-Free

Amapharamitha

♦E1 interface

I-Interface Standard: thobela umthetho olandelwayo G.703;

Isilinganiso sokusebenzisana: 2048Kbps±50ppm;

Ikhodi Yesixhumanisi: HDB3;

Ukuphazamiseka: 75Ω (ukungalingani), 120Ω (ibhalansi);

Ukubekezelela i-Jitter: Ngokuvumelana nephrothokholi G.742 kanye ne-G.823

Ukunakwa okuvunyelwe: 0~6dBm

♦Isixhumi esibonakalayo se-serial

Okujwayelekile

I-EIA/TIA-232 RS-232 (ITU-T V.28)

I-EIA/TIA-422 RS-422 (ITU-T V.11)

I-EIA/TIA-485 RS-485 (ISO/IEC8284)

I-Serial Interface

RS-422: TXD+, TXD-, RXD+, RXD-, Isiginali Ground

RS-485 4 izintambo: TXD+, TXD-, RXD+, RXD-, Signal Ground

RS-485 2 izintambo: Idatha+(Correspond TX+), Idatha-(Xhumana no-TX-), Indawo Yesiginali

I-RS-232: i-RXD, i-TXD, i-Signal Ground

♦Indawo yokusebenza

Izinga lokushisa lokusebenza: -10°C ~ 50°C

Umswakamo osebenzayo: 5% ~ 95% (akukho ukufingqa)

Izinga lokushisa lesitoreji: -40°C ~ 80°C

Umswakamo Wesitoreji: 5%~95 % (akukho ukufingqa)

Imininingwane

Isicelo

Isixazululo esijwayelekile 1

Isixazululo esijwayelekile 2