Wholesale Aoc Optical Fiber Cable - QSFP+/4-SFP+ Active Optical Cables JHA-QSFP-4SFP-40G-AOC – JHA

Short Description:

Overview

Feedback (2)

Download

Gaining purchaser gratification is our firm's intention eternally. We will make wonderful endeavours to build new and high quality merchandise, satisfy your exclusive needs and provide you with pre-sale, on-sale and after-sale products and services for Duplex , Analog Telephone Fxs/ Fxo , Telephone Fiber Converter , We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!

Wholesale Aoc Optical Fiber Cable - QSFP+/4-SFP+ Active Optical Cables JHA-QSFP-4SFP-40G-AOC – JHA Detail:

◊ Support 40-4*10GBASE-SR application

◊ Electrical interface compliant to QSFP+ connector (SFF-8436) and SFP+ connector (SFF-8431)

◊ 850nm VCSEL transmitter, PIN photo-detector receiver

◊ Multi rate of up to 10.3125Gbps per lane

◊ Operating case temperature: 0 to 70℃

◊ +3.3V power supply voltage

◊ Low power consumption

◊ RoHS compliant

◊ UL certification cables (optional)

Applications

◊ 40-4*10 Gbe-SR

◊ Fibre Channel Applications

◊ InfiniBand QDR, SDR, DDR

◊ Servers, switches, storage and host card adapters,etc.

Specifications:

Absolute Maximum Ratings

Parameter	Symbol	Min	Typical	Max	Unit
Storage Temperature	T_S	-10	-	+85	℃
Operating Humidity	RH	+5	-	+85	%
Supply Voltage	V_CC	-0.5	+3.3	+3.6	V

Recommended Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Operating Case Temperature	TC	0		+70	℃
Supply Voltage	VCC	+3.14	+3.3	+3.47	V
Supply current (QSFP+)	ICC	-	-	450	mA
Supply current (SFP+)(per terminal)		-	-	150	mA
Channel Data Rate	Dr		10.3125	-	Gbps
Fiber bend radius	-	3	-	-	CM

Electrical and Optical characteristics

Measured condition: Channel Data Rate 10.3125Gbps, VR_CCR=3.3V, PRBS31, Case Operating Temperature 0~70℃

Transmitter

Parameter	Symbol	Min	Typical	Max	Unit
Centre Wavelength	λ_c	830	850	870	nm
RMS spectral width	Pm	-	-	0.45	nm
Average launch power, each lane	P_AVG	-6.0	-	+2.4	dBm
Extinction Ratio	ER	3.0	-	-	dB
Input differential swing	Vin PP	200	-	1600	mV
Input differential impedance	Zin	90	100	110	Ω

Receiver

Parameter	Symbol	Min	Typical	Max	Unit
Centre Wavelength	λ_c	830	850	870	nm
Bit Error Rate	BER	-	-	E-12
Differential Data Output Swing	Vout PP	400	-	1000	mV
Output Differential Impedance	Zout	90	100	110	Ω

QSFP + Pin Descriptions

PIN	Name	Function/Description
1	GND	Module Ground
2	Tx2n	Transmitter inverted data input
3	Tx2p	Transmitter non-inverted data input
4	GND		Module Ground
5	Tx4n		Transmitter inverted data input
6	Tx4p		Transmitter non-inverted data input
7	GND		Module Ground
8	MODSEIL		Module Select
9	ResetL		Module Reset
10	VCCRx		+3.3v Receiver Power Supply
11	SCL		2-wire Serial interface clock
12	SDA		2-wire Serial interface data
13	GND		Module Ground
14	RX3p		Receiver non-inverted data output
15	RX3n		Receiver inverted data output
16	GND		Transmitter Power Supply
17	RX1p		Receiver non-inverted data output
18	RX1n		Receiver inverted data output
19	GND		Module Ground
20	GND		Module Ground
21	RX2n		Receiver inverted data output
22	RX2p		Receiver non-inverted data output
23	GND		Module Ground
24	RX4n		Receiver inverted data output
25	RX4p		Receiver non-inverted data output
26	GND		Module Ground
27	ModPrsL		Module Present, internal pulled down to GND
28	IntL		Interrupt output, should be pulled up on host board
29	VCCTx		+3.3v Transmitter Power Supply
30	VCC1		+3.3v Power Supply
31	LPMode		Low Power Mode
32	GND		Module Ground
33	Tx3p		Transmitter non-inverted data input
34	Tx3n		Transmitter inverted data input
35	GND		Module Ground
36	Tx1p		Transmitter non-inverted data input
37	Tx1n		Transmitter inverted data input
38	GND		Module Ground

SFP + Pin Descriptions

Pin	Symbol	Name/Description	Notes
1	VEET	Module Transmitter Ground	1
2	TX_FAULT	Module Transmitter Fault	2
3	TX_DISABLE	Transmitter Disable; Turns off transmitter laser output	3
4	SDA	2-Wire Serial Interface Data Line (MOD-DEF2)
5	SCL	2-Wire Serial Interface Clock (MOD-DEF1)
6	MOD_ABS	Module Absent, connected to V_EET or V_EER in the module	2
7	RS0	Rate Select 0, optionally controls SFP+ module receiver
8	RX_LOS	Receiver Loss of Signal Indication (In FC designated as Rx_LOS and in Ethernet designated as NOT Signal Detect)	2
9	RS1	Rate Select 1, optionally controls SFP+ module transmitter
10	V_EER	Module Receiver Ground	1
11	V_EER	Module Receiver Ground	1
12	RD-	Receiver Inverted Data Output
13	RD+	Receiver Non-Inverted Data Output
14	V_EER	Module Receiver Ground	1
15	V_CCR	Module Receiver 3.3 V Supply
16	V_CCT	Module Transmitter 3.3 V Supply
17	V_EET	Module Transmitter Ground	1
18	TD+	Transmitter Non-Inverted Data Input
19	TD-	Transmitter Inverted Data Input
20	V_EET	Module Transmitter Ground	1