Lihlahisoa tse Ncha tse Chesang 1 Stm-4 Sdh - 4E1+4FE PDH Fiber Multiplexer JHA-CPE4F4 – JHA

4E1+4FE PDH Fiber Multiplexer JHA-CPE4F4

Kakaretso

Sesebelisoa sena se fana ka sebopeho sa 1-4 * E1, 1-4 * 10M / 100M Ethernet interface (Wire Speed ​​100M) le 2 segokanyimmediamentsi sa sebolokigolo. 4 * Ethernet interface ke switch interface, e ka tšehetsa VLAN. 2 segokanyimmediamentsi sa sebolokigolo e ka sebelisoa e le mocha oa phetiso ea RS232/RS485/RS422 asynchronous data. E tenyetseha haholo. E na le ts'ebetso ea alamo. Mosebetsi o ka tšeptjoa, o tsitsitse, 'me o sebelisa matla a fokolang, ho kopanya ho phahameng, boholo bo nyane.

Setšoantšo sa Sehlahisoa

Likaroloana

• E ipapisitse le IC ea boinotšing
• Modular wide dynamic Optical detector
• Sekhahla sa Ethernet (Line Speed ​​100M) ke 10M/100M, halofo/full duplex Auto-Nego
• Khokahano ea E1 e lumellana le G.703, e amohela mokhoa oa ho hlaphoheloa oa oache ea dijithale le theknoloji e notlelang mohato o bonolo
• E sebelisa mohala o tloahelehileng oa 2 (lithupa tseo e seng tsa mohala) tse behiloeng joalo ka mohala oa odara oa boenjiniere(ho ikhethela)
• Fana ka 2 segokanyimmediamentsi sa sebolokigolo e ka sebelisoa e le mocha oa phetiso ea RS232/RS485/RS422 asynchronous data.
• Ha lets'oao la optical le lahleheloa ke, le ka bona hore sesebelisoa se hole se koetsoe kapa faeba e khaotsoe, 'me e bontša alamo ka LED.
• Sesebelisoa sa lehae se ka sheba boemo bo sebetsang ba sesebelisoa se hole
• Fana ka taelo ea sebopeho se hole sa Loop Back, nolofatsa tlhokomelo ea mohala
• Sebaka sa phetisetso se fihla ho 2-120Km ntle le tšitiso
• AC 220V, DC-48V, DC24V e ka ba khetho
• DC-48V/DC24V mosebetsi oa ho lemoha polarity ea phepelo ea motlakase, Mahala Polarity

Mekhahlelo

♦Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Boholo ba sebaka sa phetisetso: 5Km @ 62.5 / 125um fiber e le 'ngoe ea mode, attenuation (3dbm/km)

Bolelele ba Leqhubu: 820nm

Matla a ho fetisa: -12dBm (Min) ~-9dBm (Max)

Kutloisiso ea moamoheli: -28dBm (Mots)

Tekanyetso ea khokahano: 16dBm

Fiber ea mofuta o le mong

8/125um, 9/125um

Bolelele ba phetisetso e kholo: 40Km

Sebaka sa phetisetso: 40Km @ 9 / 125um fiber e le 'ngoe ea mode, attenuation (0.35dbm/km)

Bolelele ba maqhubu: 1310nm

Matla a ho fetisa: -9dBm (Min) ~-8dBm (Max)

Kutloisiso ea moamoheli: -27dBm (Min)

Tekanyetso ea khokahano: 18dBm

♦E1 Interface

Interface Standard: lumellana le protocol G.703;
Interface Rate: n * 64Kbps ± 50ppm;
Khoutu ea Sehokelo: HDB3;

Tšitiso ea E1: 75Ω (ho se leka-lekane), 120Ω (ho leka-lekana);

Jitter tolerance: Ho latela protocol G.742 le G.823

Tlhokomelo e lumelletsoeng: 0 ~ 6dBm

♦Khokahano ea Ethernet (10/100M)

Sekhahla sa khokahano: 10/100 Mbps, halofo / e felletseng ea duplex ea lipuisano

Interface Standard: E lumellana le IEEE 802.3, IEEE 802.1Q (VLAN)

Bokhoni ba Aterese ea MAC: 4096

Sehokelo: RJ45, tšehetsa Auto-MDIX

♦Tikoloho ya mosebetsi

Mocheso o sebetsang: -10°C ~ 50°C

Mongobo o sebetsang: 5% ~ 95% (ha ho condensation)

Mocheso oa polokelo: -40°C ~ 80°C

Mongobo oa polokelo: 5% ~ 95% (ha ho condensation)

Litlhaloso

Kopo