Boleng bo Phahameng E1+Ethernet Pdh Mux - 16E1+LCD Display +SNMP JHA-C2P-E16bF4R2 PDH Fiber Multiplexer – JHA

16E1+LCD Pontšo +SNMP JHA-C2P-E16bF4R2

PDH Fiber Multiplexer

Kakaretso

Sesebelisoa sena se na le taolo ea khokahano, se fana ka ts'ireletso ea 1 + 1 fiber back-up, ho supa phetiso ea optical, ponts'o ea LCD, motheong oa nts'etsopele ea k'hamphani ea rona ea phetisetso ea PDH optical, sebelisa VLSI e khethehileng le SNMP NMS.

Sesebelisoa se fana ka sebopeho sa 1-16 * E1, 1-4 * 10 / 100M Ethernet interface (Wire speed 100M) le 2 segokanyimmediamentsi sa sebolokigolo. 4Channel Ethernet segokanyimmediamentsi sa sebolokigolo ke switjha segokanyimmediamentsi sa sebolokigolo, ka tšehetsa VLAN. 2 segokanyimmediamentsi sa sebolokigolo e ka sebelisoa e le mocha oa phetiso ea RS232/RS485/RS422 asynchronous data. E tenyetseha haholo. E na le ts'ebetso ea alamo. Mosebetsi o ka tšeptjoa, o tsitsitse, 'me o sebelisa matla a fokolang, ho kopanya ho phahameng, boholo bo fokolang

Setšoantšo sa Sehlahisoa

Likaroloana

• E fana ka 16 E1 phetiso e pepeneneng;
• Ka char 16 * 2 LCD pontšo le SNMP moemeli ka hare
• Fana ka sebopeho sa taolo ea Console (RS232)
• Fana ka likhokahano tse peli tsa fiber 1+1 sireletsa (APS) ts'ebetso, le ALS (Automatic Laser Shutdown/Reduction)
• Ts'ehetso ea boholo ba sephutheloana sa Ethernet 1916 byte le 4 Ethernet port e ka beoa ka thoko, 'me bandwidth ea ethernet e ka theha motheo ho tse ngata tsa 32K.
• E sebelisa mohala o tloahelehileng oa 2 (lithupa tseo e seng tsa mohala) tse behiloeng joalo ka mohala oa odara oa boenjiniere(ho ikhethela)
• Fana ka likhokahano tse peli tsa fiber, e 'ngoe e le monghali, e 'ngoe e le lekhoba, e netefatsa phetisetso ea litšebeletso e sa sitisoeng
• Sekhahla sa optical port ke 155Mbps, mefuta ea phetisetso e ka fihla ho 25KM, 40KM, 60KM, 80KM kapa 120KM;
• Khoutu ea segokanyimmediamentsi sa sebolokigolo E1 ke HDB3, E1 thothometsa tšobotsi e lumellana le ITU-T G.703, G.823 le G.742;
• Boema-kepe ba Ethernet bo tšehetsa duplex e felletseng / halofo, 10/100M auto-Nego;
• Boema-kepe ba Ethernet bo tšehetsa ts'ebetso ea VLAN mme e na le mokhoa oa 4 oa ho arola bakeng sa khetho ea mosebelisi;
• E na le ts'ebetso e felletseng ea alamo mme e khona ho beha leihlo boemo ba sesebelisoa se hole;
• E ts'ehetsa mekhoa e 'meli ea Fiber Loop-back, le Four E1 loop-back mode, le ho laola sesebelisoa habonolo;
• alamo e ka lokisehang ea basebelisi le alamo e nyane, e bonts'ang ka LCD le alamo ea molumo ho sebui;
• AC 220V, DC-48V, DC+24V e ka ba khetho
• DC-48V/DC+24V ts'ebetso ea ho lemoha polarity ea phepelo ea motlakase, Mahala Polarity

Mekhahlelo

♦Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Boholo ba sebaka sa phetisetso: 5Km @ 62.5 / 125um fiber e le 'ngoe ea mode, attenuation (3dbm/km)

Bolelele ba Leqhubu: 820nm

Matla a ho fetisa: -12dBm (Min) ~-9dBm (Max)

Kutloisiso ea moamoheli: -28dBm (Mots)

Tekanyetso ea khokahano: 16dBm

Fiber ea mofuta o le mong

8/125um, 9/125um

Bolelele ba phetisetso e kholo: 40Km

Sebaka sa phetisetso: 40Km @ 9 / 125um fiber e le 'ngoe ea mode, attenuation (0.35dbm/km)

Bolelele ba maqhubu: 1310nm

Matla a ho fetisa: -9dBm (Min) ~-8dBm (Max)

Kutloisiso ea moamoheli: -27dBm (Min)

Tekanyetso ea khokahano: 18dBm

♦E1 Interface

Interface Standard: lumellana le protocol G.703;
Sekhahla sa Sehokelo: 2048Kbps ± 50ppm;
Khoutu ea Sehokelo: HDB3;

Tšitiso ea E1: 75Ω (ho se leka-lekane), 120Ω (ho leka-lekana);

Jitter tolerance: Ho latela protocol G.742 le G.823

Tlhokomelo e lumelletsoeng: 0 ~ 6dBm

♦Khokahano ea Ethernet (10/100M)

Sekhahla sa khokahano: 10/100 Mbps, halofo / e felletseng ea duplex ea lipuisano

Interface Standard: E lumellana le IEEE 802.3, IEEE 802.1Q (VLAN)

Bokhoni ba Aterese ea MAC: 4096

Sehokelo: RJ45, tšehetsa Auto-MDIX

♦Tikoloho ya mosebetsi

Mocheso o sebetsang: -10°C ~ 50°C

Mongobo o sebetsang: 5% ~ 95% (ha ho condensation)

Mocheso oa polokelo: -40°C ~ 80°C

Mongobo oa polokelo: 5% ~ 95% (ha ho condensation)

Litlhaloso

Kopo