Ọnụ ahịa N'ogbe China 4-Ch Tinye/Dobe Multiplexer Single Fiber - 16E1 PDH Fiber Multiplexer JHA-CPE16 – JHA

Nkọwa dị mkpirikpi:

Nchịkọta

Vidiyo emetụtara

Nzaghachi (2)

Budata

Ahụmahụ njikwa ọrụ bara ụba nke ukwuu yana ụdị ọrụ otu na-eme ka mkpa nkwukọrịta azụmahịa dị na nghọta anyị dị mfe maka atụmanya gị maka.Ntụgharị mgbasa ozi SFp,Sfp Fiber Switch,Ngbanwe Rs232 ruo 485, Anyị na-atụ anya guzobe a ogologo oge azụmahịa mmekọrịta na ùgwù gị na-arụkọ ọrụ.

Ọnụ ahịa N'ogbe China 4-Ch Tinye/Dobe Multiplexer Single Fiber - 16E1 PDH Fiber Multiplexer JHA-CPE16 – JHA Nkọwa:

16E1 PDH Fiber Multiplexer JHA-CPE16

Nchịkọta

Ngwaọrụ a na-enye 1-16 Channel E1 interface, Standard 2 waya ekwentị dị ka engineering order-waya (nhọrọ). Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, ntinye dị elu, obere nha.

Foto ngwaahịa

Atụmatụ

Dabere na ikike nwebiisinka IC
Ihe nchọpụta ngwa anya dị obosara obosara modular
Na-eji ekwentị waya ọkọlọtọ 2 (aka na-abụghị ekwentị) atọrọ dị ka hotline order-waya (nhọrọ)
E1 interface na-agbaso G.703, na-anakwere mgbake elekere dijitalụ na teknụzụ dị larịị-mkpọchi
Nye interface njikwa njikwa (RS232)
Mgbe mgbama ngwa anya furu efu, ọ nwere ike ịchọpụta na ngwaọrụ dịpụrụ adịpụ agbanyụrụ ma ọ bụ eriri akwụsịla, wee gosi mkpu site na LED.
Ngwaọrụ mpaghara nwere ike ịlele ọnọdụ ọrụ ngwaọrụ dịpụrụ adịpụ
Nye iwu n'ime ime interface Loop Back, mfe mmezi ahịrị
Ebe nnyefe dị ihe ruru 2-120km na-enweghị nkwụsị
AC 220V, DC-48V, DC + 24V nwere ike ịbụ nhọrọ
DC-48V/DC + 24V ike ọkọnọ na akpaka polarity nchọpụta ọrụ, mgbe arụnyere na-enweghị ọdịiche dị n'etiti nti na adịghị mma.

Oke

♦Fiber

Multi-mode Fiber

50/125, 62.5/125,

Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)

Ogologo ebili mmiri: 820nm

Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)

Mmetụta nke nnata: -28dBm (Nkeji)

Ego njikọ: 16dBm

Otu ụdị Fiber

8/125, 9/125

Ogologo nnyefe kacha: 40Km

Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)

Ogologo ebili mmiri: 1310nm

Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)

Mmetụta nke nnata: -27dBm (Nkeji)

Ego njikọ: 18dBm

♦E1 interface

Interface Standard: soro protocol G.703;
Ọnụego ihu: n*64Kbps±50ppm;
Koodu ihu: HDB3;

E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);

Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823

Attenuation ekwenyere: 0 ~ 6dBm

♦Ebe ọrụ

Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C

Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)

Okpomọkụ nchekwa: -40°C ~ 80°C

Iru mmiri nchekwa: 5% ~ 95% (enweghị condensation)

Nkọwapụta

Nlereanya	Nọmba nlereanya: JHA-CPE16
Nkọwa ọrụ	8E1 PDH, ịtụ ekwentị ekwentị, 19 inch 1U Type, (Standard ekwentị interface, na-abụghị ekwentị ejiri)
Nkọwa Port	Otu ọdụ ụgbọ mmiri, 16 E1 interface (75/120 ohms), otu njikwa inferface
Ike	Ike ọkọnọ: AC180V ~ 260V;DC -48V;DC +24VIke oriri: ≤10W
Akụkụ	Nha ngwaahịa: 19 inch 1U 485X138X44mm(WXDXH)
Ibu	3KG/PCS

Ngwa

Foto nkọwa ngwaahịa:

Ntuziaka ngwaahịa emetụtara:

Iji nwee ike imeju ihe ndị ahịa chọrọ, a na-arụ ọrụ anyị niile n'ụzọ kwekọrọ n'ụkpụrụ anyị dị elu, mkpado ọnụahịa asọmpi, ọrụ ngwa ngwa maka ọnụ ahịa ọnụ ahịa China 4-Ch Add / Drop Multiplexer Single Fiber - 16E1 PDH Fiber Multiplexer JHA-CPE16 - JHA , The ngwaahịa ga-ezitekwara n'ụwa nile, dị ka: Jamaica, Haiti, Paraguay, N'ịbụ ndị ezi ngwọta nke anyị factory, anyị ngwọta anwalela usoro wee nweta anyị asambodo ikike ikike. Maka nkọwa ndị ọzọ na ndepụta ihe, biko pịa bọtịnụ iji nweta ozi agbakwunyere.