Ọnụ ụzọ ntụgharị ụzọ OEM/ODM China Protocol - E1-16 Channel RS232/RS422/RS485 Ntụgharị JHA-CE1D16/R16/Q16 – JHA

Ọwa E1-16 RS232/RS422/RS485 NtụgharịJHA-CE1D16/R16/Q16

Nchịkọta

Nke a interface ntụgharị dabeere na FPGA, na-enye 16Channel RS232/485/422 nnyefe na E1 interface. Ngwaahịa a na-agbaji site na esemokwu dị n'etiti anya nzikọrịta ozi serial interface ọdịnala na ọnụego nzikọrịta ozi, ewezuga, ọ nwekwara ike dozie nnyonye anya elektrọn, nnyonye anya mgbanaka ala na mmebi ọkụ. Ngwaọrụ na-eme ka ntụkwasị obi dịkwuo mma, nchekwa na nzuzo nke nzikọrịta ozi data. A na-eji ya maka njikwa ụlọ ọrụ dị iche iche, njikwa usoro na oge njikwa okporo ụzọ, ọkachasị maka Bank, na ike na mpaghara ndị ọzọ na sistemụ nwere ihe pụrụ iche chọrọ maka gburugburu nnyonye anya electromagnetic. Ọwa RS232/RS485/RS422 nwere ike ibunye data serial asynchronously 0Kbps-14400bps baud ọnụego.

Foto ngwaahịa

19inch 1U ụdị

Atụmatụ

• Dabere na ikike nwebiisinka IC
• Nkwado 3 ahịrị RS232 (TXD, RXD, GND), nkwado maka CD njikwa, DSR, CTS
• Nwee loop azụ azụ atọ: E1 interface Loop Back (ANA),RS232/485/422 interface Loop Back(DIG),Nye iwu nke dịpụrụ adịpụ RS232/485/422 interface Loop Back(REM)
• RS232/RS485/RS422 na-akwado nkwụnye ọkụ, na-akwado njikọ DTE ma ọ bụ DCE ngwaọrụ.
• Ọwa RS232/RS485/RS422 nwere ike ibunye data serial na-agbanwe agbanwe n'otu n'otu ọnụego baud 0Kbps-14400bps
• Nwee ọrụ nyocha koodu nzuzo pseudo, ahịrị mepere emepe ngwa ngwa, enwere ike iji ya dị ka onye nyocha 2M BER
• Serial ọdụ ụgbọ mmiri interface àmụmà-nchedo ruru IEC61000-4-5 (8/20μS) DM (dị iche na ọnọdụ): 6KV, Impedance (2 Ohm), CM (Common Mode): 6KV, Impedance (2 Ohm) ọkọlọtọ.
• Nye 2 impedances: 75 Ohm enweghị nguzozi na 120 Ohm itule;
• Ọ nwere ike na-etolite E1 Oghere Usoro Ntụgharị (A) - E1 fiber optic modem (B) - eriri serial modem (C) topology
• AC 220V, DC-48V, DC+24V, DC ike na Polarity-free

Oke

♦E1 interface

Interface Standard: soro protocol G.703;

Ọnụego ntanetị: 2048Kbps± 50ppm;

Koodu ihu: HDB3;

Mgbochi: 75Ω (unbalance), 120Ω (balance);

Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823

Attenuation ekwenyere: 0 ~ 6dBm

♦Oghere Usoro interface

Ọkọlọtọ

EIA/TIA-232 RS-232 (ITU-T V.28)

EIA/TIA-422 RS-422 (ITU-T V.11)

EIA/TIA-485 RS-485 (ISO/IEC8284)

Oghere Usoro Interface

RS-422: TXD+, TXD-, RXD+, RXD-, Ala mgbaama

RS-485 4 wires: TXD+, TXD-, RXD+, RXD-, Ala mgbaama

RS-485 2 wires: Data+(TX+ kwekọrọ), Data-(kwekọrọ TX-), Ala mgbaama

RS-232: RXD, TXD, Ala mgbaama

♦Ebe ọrụ

Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C

Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)

Okpomọkụ nchekwa: -40°C ~ 80°C

Ebe nchekwa iru mmiri: 5% ~ 95 % (enweghị condensation)

Nkọwapụta

Ngwa

Ihe ngwọta a na-ahụkarị 1

Ihe ngwọta a na-ahụkarị 2