OEM Na-eweta Fiber Optic Dwdm - 4E1 PDH Fiber Multiplexer JHA-CPE4 (ụdị 19 inch 1U) - JHA

OEM Na-ebunye Fiber Optic Dwdm - 4E1 PDH Fiber Multiplexer JHA-CPE4 (ụdị 19 inch 1U) - Foto egosipụtara JHA

Nkọwa dị mkpirikpi:

Nchịkọta

Vidiyo emetụtara

Nzaghachi (2)

Budata

Nzukọ anyị na-elekwasị anya na atụmatụ ika. Afọ ojuju ndị ahịa bụ nnukwu mgbasa ozi anyị. Anyị na-ebutekwa ndị na-eweta OEM makaRs485 gaa na USB Ntụgharị,PCm 30 Channel Multiplexer,16 ruo 4 Multiplexer, Ụlọ ọrụ anyị na-atụsi anya ike ịmepụta mmekọrịta enyi na enyi azụmahịa na ndị ahịa na ndị ọchụnta ego si n'ụwa nile.

OEM Na-eweta Fiber Optic Dwdm - 4E1 PDH Fiber Multiplexer JHA-CPE4 (ụdị 19 inch 1U) - Nkọwa JHA:

4E1 PDH Fiber Multiplexer JHA-CPE4

(ụdị 19 inch 1U)

Nchịkọta

Ngwaọrụ a na-enye 1-4* E1 interface , Standard 2 waya ekwentị dị ka engineering usoro-waya (nhọrọ). Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, ntinye dị elu, obere nha.

Foto ngwaahịa

Atụmatụ

Dabere na ikike nwebiisinka IC
Ihe nchọpụta ngwa anya dị obosara obosara modular
Na-eji ekwentị waya ọkọlọtọ 2 (aka na-abụghị ekwentị) atọrọ dị ka hotline order-waya (nhọrọ)
E1 interface na-agbaso G.703, na-anakwere mgbake elekere dijitalụ na teknụzụ dị larịị-mkpọchi
Mgbe mgbama ngwa anya furu efu, ọ nwere ike ịchọpụta na ngwaọrụ dịpụrụ adịpụ agbanyụrụ ma ọ bụ eriri akwụsịla, wee gosi mkpu site na LED.
Ngwaọrụ mpaghara nwere ike ịlele ọnọdụ ọrụ ngwaọrụ dịpụrụ adịpụ
Nye iwu n'ime ime interface Loop Back, mfe mmezi ahịrị
Ebe nnyefe dị ihe ruru 2-120km na-enweghị nkwụsị
AC 220V, DC-48V, DC + 24V nwere ike ịbụ nhọrọ
DC-48V/DC + 24V ike ọkọnọ na akpaka polarity nchọpụta ọrụ, mgbe arụnyere na-enweghị ọdịiche dị n'etiti nti na adịghị mma.

Oke

♦Fiber

Multi-mode Fiber

50/125, 62.5/125,

Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)

Ogologo ebili mmiri: 820nm

Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)

Mmetụta nke nnata: -28dBm (Nkeji)

Ego njikọ: 16dBm

Otu ụdị Fiber

8/125, 9/125

Ogologo nnyefe kacha: 40Km

Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)

Ogologo ebili mmiri: 1310nm

Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)

Mmetụta nke nnata: -27dBm (Nkeji)

Ego njikọ: 18dBm

♦E1 interface

Interface Standard: soro protocol G.703;
Ọnụego ntanetị: 2048Kbps± 50ppm;
Koodu ihu: HDB3;

E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);

Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823

Attenuation ekwenyere: 0 ~ 6dBm

♦Ebe ọrụ

Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C

Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)

Okpomọkụ nchekwa: -40°C ~ 80°C

Iru mmiri nchekwa: 5% ~ 95% (enweghị condensation)

Nkọwapụta

Nlereanya	Nọmba nlereanya:JHA-CPE4
Nkọwa ọrụ	4E1 PDH ， ịtụ ekwentị ekwentị, 19 inch 1U Ụdị （Standard ekwentị interface, na-abụghị ekwentị ejiri)
Nkọwa Port	Otu ọdụ ụgbọ mmiri, 4 E1 interface (75/120 ohms)
Ike	Ike ọkọnọ: AC180V ~ 260V;DC-48V;DC+24VIke oriri: ≤10W
Akụkụ	Nha ngwaahịa: 19 inch 1U 485X138X44mm(WXDXH)
Ibu	2.3KG/PCS

Ngwa

Foto nkọwa ngwaahịa:

Ntuziaka ngwaahịa emetụtara:

Anyị nke ọma akụrụngwa na magburu onwe njikwa magburu onwe ya niile nkebi nke e kere eke na-enyere anyị na-ekwe nkwa ngụkọta asịwo afọ ojuju maka OEM Supply Fiber Optic Dwdm - 4E1 PDH Fiber Multiplexer JHA-CPE4 (19 Inch 1U Type) – JHA , Ngwaahịa ga-enye niile n'ụwa nile, dị ka: Hanover, Nepal, Swedish, Dabere na ndị injinia nwere ahụmahụ, a na-anabata iwu niile maka nhazi ihe osise ma ọ bụ ihe nlele. Anyị enwetala aha ọma maka ọrụ ndị ahịa pụtara ìhè n'etiti ndị ahịa anyị si mba ofesi. Anyị ga-anọgide na-agbalị na-enye gị ezigbo mma ngwaahịa na ofụri heartedly ọrụ. Anyị na-atụ anya ijere gị ozi.