Ọsọ ngwa ngwa Ccwdm Mux - 16E1+LCD Ngosipụta +SNMP JHA-C2P-E16bF4R2 PDH Fiber Multiplexer – JHA

Nkọwa dị mkpirikpi:


Nchịkọta

Vidiyo emetụtara

Nzaghachi (2)

Budata

Anyị na-ewere ndị ahịa-enyi na enyi, mma-gbakwasara, mwekota, ọhụrụ dị ka ebumnobi. Eziokwu na eziokwu bụ njikwa anyị dị mma makaIhe Ntụgharị vidiyo Ahd Fiber,Ngwa anya Cwdm,Rs485 gaa na USB Ntụgharị, Anyị ji obi ụtọ na-anabata ndị ahịa, ndị otu azụmahịa na ndị enyi si n'akụkụ ụwa niile ka ha kpọtụrụ anyị ma chọọ imekọ ihe ọnụ maka uru otu.
Ọsọ ngwa ngwa Ccwdm Mux - 16E1+LCD Ngosipụta +SNMP JHA-C2P-E16bF4R2 PDH Fiber Multiplexer – JHA Nkọwa:

16E1+ LCD Ngosipụta + SNMP JHA-C2P-E16bF4R2

PDH Fiber Multiplexer

Nchịkọta

Ngwaọrụ a nwere njikwa njikwa, na-enye 1 + 1 fiber back-up nchebe, na-atụ aka na-arụtụ anya nnyefe, LCD ngosi , na isi nke ụlọ ọrụ anyị mmepe nke PDH ngwa anya nnyefe, na-eji pụrụ iche VLSI na SNMP NMS.

Ngwaọrụ na-enye 1-16 * E1 interface, 1-4 * 10 / 100M Ethernet interface (Wire speed 100M) na 2 mgbasawanye interface. 4Channel Ethernet interface bụ mgba ọkụ interface, nwere ike ịkwado VLAN. Enwere ike iji interface mgbasawanye 2 dị ka ọwa nnyefe nke RS232/RS485/RS422 data asynchronous. Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, ntinye dị elu, obere nha

Foto ngwaahịa

4342 (2)

Atụmatụ

  • Na-enye 16 E1 transperent nnyefe;
  • Na char 16 * 2 LCD ngosi na onye nnọchi anya SNMP n'ime
  • Nye interface njikwa njikwa (RS232)
  • Nye abụọ eriri interface 1 + 1 chebe (APS) ọrụ, na ALS (Automatic Laser Shutdown / Mbelata)
  • Enwere ike ịtọ ngwungwu nha Ethernet 1916 byte na ọdụ ụgbọ mmiri 4 Ethernet iche iche, yana bandwidth ethernet nwere ike ịtọ ntọala na otutu 32K.
  • Na-eji ekwentị waya ọkọlọtọ 2 (aka na-abụghị ekwentị) atọrọ dị ka hotline order-waya (nhọrọ)
  • Nye eriri eriri abụọ, otu dị ka nna ukwu, nke ọzọ dị ka ohu, na-eme ka nnyefe ọrụ na-akwụsịghị akwụsị
  • Ọnụ ọgụgụ nke ọdụ ụgbọ mmiri anya bụ 155Mbps, oke nnyefe nwere ike iru 25KM, 40KM, 60KM, 80KM ma ọ bụ 120KM;
  • E1 interface koodu bụ HDB3, E1 njirimara ịma jijiji kwekọrọ na ITU-T G.703, G.823 na G.742;
  • ọdụ ụgbọ mmiri Ethernet na-akwado duplex zuru oke / ọkara, 10 / 100M auto-Nego;
  • ọdụ ụgbọ mmiri Ethernet na-akwado ọrụ VLAN ma nwee ọnọdụ nhazi 4 maka nhọrọ onye ọrụ;
  • Nwere ọrụ mkpu zuru ezu ma nwee ike nyochaa ọkwa ngwaọrụ dịpụrụ adịpụ;
  • Na-akwado abụọ Fiber Loop-back, na anọ E1 loop-back mode, ma jikwaa ngwaọrụ nke ọma;
  • onye ọrụ configurable isi mkpu na obere mkpu, ngosi na LCD na ụda mkpu na ọkà okwu;
  • AC 220V, DC-48V, DC + 24V nwere ike ịbụ nhọrọ
  • DC-48V/DC+24V ike ọkọnọ ọrụ nchọpụta polarity, Polarity-free

Oke

Fiber

Multi-mode Fiber

50/125, 62.5/125,

Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)

Ogologo ebili mmiri: 820nm

Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)

Mmetụta nke nnata: -28dBm (Nkeji)

Ego njikọ: 16dBm

Otu ụdị Fiber

8/125, 9/125

Ogologo nnyefe kacha: 40Km

Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)

Ogologo ebili mmiri: 1310nm

Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)

Mmetụta nke nnata: -27dBm (Nkeji)

Ego njikọ: 18dBm

E1 interface

Interface Standard: soro protocol G.703;
Ọnụego ntanetị: 2048Kbps± 50ppm;
Koodu ihu: HDB3;

E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);

Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823

Attenuation ekwenyere: 0 ~ 6dBm

Ethernet interface (10/100M)

Ọnụọgụ ihu: 10/100Mbps, nkwurịta okwu akpaaka ọkara / zuru ezu

Ọkọlọtọ Interface: Dakọtara na IEEE 802.3, IEEE 802.1Q (VLAN)

Ike adreesị MAC: 4096

Njikọ: RJ45, nkwado Auto-MDIX

Ebe ọrụ

Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C

Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)

Okpomọkụ nchekwa: -40°C ~ 80°C

Iru mmiri nchekwa: 5% ~ 95% (enweghị condensation)

Nkọwapụta

Nlereanya Nọmba nlereanya:JHA-C2P-E16bF4R2
Nkọwa ọrụ 16 * E1, LCD PDH, 4FE, na ALS ọrụ , Console na SNMP , 1 + 1 ndabere Optic eriri
Nkọwa Port 1 + 1 ọdụ ụgbọ mmiri, 16 * E1 interfaces (75/120ohms), 4 * FE interfaces, 1 * RS232 Console interface, 1 * SNMP Ethernet interface, otu injinia usoro-waya interface ekwentị
Ike Ike ọkọnọ: AC180V ~ 260V;DC -48V;DC +24VIke oriri: ≤10W
Akụkụ Nha ngwaahịa: 19 inch 1U 485X138X45mm(WXDXH)
Ibu 3KG

Ngwa

4342 (1)


Foto nkọwa ngwaahịa:

Ọsọ ngwa ngwa Ccwdm Mux - 16E1+LCD Ngosipụta +SNMP JHA-C2P-E16bF4R2 PDH Fiber Multiplexer – Foto nkọwa JHA

Ọsọ ngwa ngwa Ccwdm Mux - 16E1+LCD Ngosipụta +SNMP JHA-C2P-E16bF4R2 PDH Fiber Multiplexer – Foto nkọwa JHA

Ọsọ ngwa ngwa Ccwdm Mux - 16E1+LCD Ngosipụta +SNMP JHA-C2P-E16bF4R2 PDH Fiber Multiplexer – Foto nkọwa JHA


Ntuziaka ngwaahịa emetụtara:

Ọ bụ ụzọ dị mma isi melite ngwaahịa na ọrụ anyị. Ebumnuche anyị bụ ịmepụta ngwaahịa ndị na-emepụta ihe na ndị ahịa nwere ahụmahụ dị mma maka nnyefe ngwa ngwa Ccwdm Mux - 16E1 + LCD Display + SNMP JHA-C2P-E16bF4R2 PDH Fiber Multiplexer - JHA , Ngwaahịa ahụ ga-enye ụwa niile, dị ka: Bangkok. , Egypt, Melbourne, Na ike ike na ọzọ a pụrụ ịdabere na kredit, anyị nọ ebe a na-ejere ndị ahịa anyị ozi site n'inye ndị elu àgwà na ọrụ, na anyị na-ekele gị nke ukwuu. nkwado. Anyị ga-agba mbọ idowe aha ọma anyị dị ka ndị na-ebubata ngwaahịa dị elu n'ụwa. Ọ bụrụ na ị nwere ajụjụ ọ bụla ma ọ bụ kwuo, biko kpọtụrụ anyị n'efu.

Nke a bụ azụmahịa mbụ mgbe ụlọ ọrụ anyị guzobechara, ngwaahịa na ọrụ na-enye afọ ojuju, anyị nwere mmalite dị mma, anyị na-atụ anya ịkwado na-aga n'ihu n'ọdịnihu!
Kpakpando 5Site na Clementine si Ireland - 2017.05.21 12:31
Ụlọ ọrụ a nwere echiche nke mma mma, obere nhazi ụgwọ, ọnụ ahịa ndị ọzọ ezi uche, ya mere, ha nwere asọmpi ngwaahịa àgwà na price, nke ahụ bụ isi ihe mere anyị ji họrọ imekọ ihe ọnụ.
Kpakpando 5Site na Evelyn si Angola - 2017.11.11 11:41
Dee ozi gị ebe a ziga anyị ya