Ụlọ ọrụ mmepụta ihe n'ùkwù Optical Cwdm - 8E1 PDH Fiber Multiplexer JHA-CPE8 - JHA

Nkọwa dị mkpirikpi:

Nchịkọta

Vidiyo emetụtara

Nzaghachi (2)

Budata

Anyị na-arapara na mmụọ nke ụlọ ọrụ anyị nke Ogo, arụmọrụ, ihe ọhụrụ na iguzosi ike n'ezi ihe. Anyị bu n'obi ịmepụta uru maka ndị ahịa anyị na akụ anyị bara ụba, igwe dị elu, ndị ọrụ nwere ahụmahụ na ọrụ magburu onwe ya makaIhe Ntụgharị eriri ekwentị olu PCm,8 Poe Switch,Ihe Ntụgharị China Fiber Media, Ụkpụrụ nke ụlọ ọrụ anyị bụ ịnye ngwaahịa dị elu, ọrụ ọkachamara, na nkwurịta okwu n'eziokwu. Nabata ndị enyi niile ka ha tinye usoro ikpe maka ịmepụta mmekọrịta azụmahịa ogologo oge.

Ụlọ ọrụ mmepụta ihe n'ùkwù Optical Cwdm - 8E1 PDH Fiber Multiplexer JHA-CPE8 - Nkọwa JHA:

8E1 PDH Fiber Multiplexer JHA-CPE8

Nchịkọta

Ngwaọrụ a na-enye 1-8 Channel E1 interface, Standard 2 waya ekwentị dị ka engineering order-waya (nhọrọ). Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, ntinye dị elu, obere nha.

Foto ngwaahịa

Atụmatụ

Dabere na ikike nwebiisinka IC
Ihe nchọpụta ngwa anya dị obosara obosara modular
Na-eji ekwentị waya ọkọlọtọ 2 (aka na-abụghị ekwentị) atọrọ dị ka hotline order-waya (nhọrọ)
E1 interface na-agbaso G.703, na-anakwere mgbake elekere dijitalụ na teknụzụ dị larịị-mkpọchi
Nye interface njikwa njikwa (RS232)
Mgbe mgbama ngwa anya furu efu, ọ nwere ike ịchọpụta na ngwaọrụ dịpụrụ adịpụ agbanyụrụ ma ọ bụ eriri akwụsịla, wee gosi mkpu site na LED.
Ngwaọrụ mpaghara nwere ike ịlele ọnọdụ ọrụ ngwaọrụ dịpụrụ adịpụ
Nye iwu n'ime ime interface Loop Back, mfe mmezi ahịrị
Ebe nnyefe dị ihe ruru 2-120km na-enweghị nkwụsị
AC 220V, DC-48V, DC + 24V nwere ike ịbụ nhọrọ
DC-48V/DC + 24V ike ọkọnọ na akpaka polarity nchọpụta ọrụ, mgbe arụnyere na-enweghị ọdịiche dị n'etiti nti na adịghị mma.

Oke

♦Fiber

Multi-mode Fiber

50/125, 62.5/125,

Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)

Ogologo ebili mmiri: 820nm

Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)

Mmetụta nke nnata: -28dBm (Nkeji)

Ego njikọ: 16dBm

Otu ụdị Fiber

8/125, 9/125

Ogologo nnyefe kacha: 40Km

Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)

Ogologo ebili mmiri: 1310nm

Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)

Mmetụta nke nnata: -27dBm (Nkeji)

Ego njikọ: 18dBm

♦E1 interface

Interface Standard: soro protocol G.703;
Ọnụego ntanetị: 2048Kbps± 50ppm;
Koodu ihu: HDB3;

E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);

Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823

Attenuation ekwenyere: 0 ~ 6dBm

♦Ebe ọrụ

Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C

Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)

Okpomọkụ nchekwa: -40°C ~ 80°C

Iru mmiri nchekwa: 5% ~ 95% (enweghị condensation)

Nkọwapụta

Nlereanya	Nọmba nlereanya: JHA-CPE8
Nkọwa ọrụ	8E1 PDH ， ịtụ ekwentị ekwentị, 19 inch 1U Ụdị （Standard ekwentị interface, na-abụghị ekwentị ejiri)
Nkọwa Port	Otu ọdụ ụgbọ mmiri, 8 E1 interface (75/120 ohms), otu njikwa inferface
Ike	Ike ọkọnọ: AC180V ~ 260V;DC -48V;DC +24VIke oriri: ≤10W
Akụkụ	Nha ngwaahịa: 19 inch 1U 483X138X44mm(WXDXH)
Ibu	2.3KG/PCS

Ngwa

Foto nkọwa ngwaahịa:

Ntuziaka ngwaahịa emetụtara:

Anyị adịla njikere ịkekọrịta ihe ọmụma anyị gbasara mgbasa ozi n'ụwa niile ma kwado gị ngwaahịa ndị dabara adaba na ọnụ ahịa ike ike. Ya mere Profi Tools present you ideal price of money and we have been ready to create with each other with Factory wholesale Optical Cwdm - 8E1 PDH Fiber Multiplexer JHA-CPE8 – JHA , The ngwaahịa ga-ezitekwara n'ụwa nile, dị ka: Mongolia , Durban, Jordan, Iji nweta ozi ndị ọzọ gbasara anyị yana ịhụ ngwaahịa anyị niile, biko gaa na webụsaịtị anyị. Iji nweta ozi ndị ọzọ biko nweere onwe gị ka anyị mara. Daalụ nke ukwuu ma na-achọ ka azụmahịa gị na-adị mma mgbe niile!