2019 Ezi Ogo Ọpụpụ Ọpụpụ Pdh Multiplexer - 4E1 PDH Fiber Multiplexer JHA-CPE4m – JHA

2019 Ezi Ogo Ọpụpụ Ọpụpụ Pdh Multiplexer - 4E1 PDH Fiber Multiplexer JHA-CPE4m – Foto egosipụtara JHA

Nkọwa dị mkpirikpi:

Nchịkọta

Vidiyo emetụtara

Nzaghachi (2)

Budata

Iji ghọọ ogbo nke ịghọta nrọ nke ndị ọrụ anyị! Iji wulite ndị ọrụ na-enwe obi ụtọ, ịdị n'otu na ndị ọkachamara ọzọ! Iji ruo otu uru nke atụmanya anyị, suppliers, ọha mmadụ na onwe anyị makaLayer 2 Ethernet Switch,Rs485 gaa Ethernet,Gigabit Ethernet Optical Fiber Switch, Ebe ọ bụ na ụlọ ọrụ mmepụta ihe tọrọ ntọala, anyị emeela ugbu a na ọganihu nke ngwaahịa ọhụrụ. Mgbe ị na-eji usoro mmekọrịta mmadụ na ibe ya na nke akụ na ụba, anyị ga-aga n'ihu na-ebuso mmụọ nke ịdị elu dị elu, arụmọrụ, ihe ọhụrụ, iguzosi ike n'ezi ihe, ma nọgide na-arụ ọrụ nke kredit ka ịmalite, onye ahịa na mbụ, ezigbo mma. Anyị na ndị enyi anyị ga-eme ka ntutu dị ogologo dị ịtụnanya.

2019 Ezi Ogo Ọpụpụ Ọpụpụ Pdh Multiplexer - 4E1 PDH Fiber Multiplexer JHA-CPE4m - Nkọwa JHA:

4E1 PDH Fiber Multiplexer JHA-CPE4m

Nchịkọta

Ngwaọrụ a na-enye 1-4* E1 interface , Standard 2 waya ekwentị dị ka engineering usoro-waya (nhọrọ). Ọ na-agbanwe nke ukwuu. O nwere ọrụ mkpu. Ọrụ ahụ bụ nke a pụrụ ịdabere na ya, kwụsie ike, na ike dị ala, ntinye dị elu, obere nha.

Foto ngwaahịa

Ogwe ihu

Ogwe azụ 75 ohm

120 ohm azụ Panel

Atụmatụ

Dabere na ikike nwebiisinka IC
Ihe nchọpụta ngwa anya dị obosara obosara modular
Na-eji ekwentị waya ọkọlọtọ 2 (aka na-abụghị ekwentị) atọrọ dị ka hotline order-waya (nhọrọ)
E1 interface na-agbaso G.703, na-anakwere mgbake elekere dijitalụ na teknụzụ dị larịị-mkpọchi
Mgbe mgbama ngwa anya furu efu, ọ nwere ike ịchọpụta na ngwaọrụ dịpụrụ adịpụ agbanyụrụ ma ọ bụ eriri kwụsịrị, wee gosi mkpu site na LED.
Ngwaọrụ mpaghara nwere ike ịlele ọnọdụ ọrụ ngwaọrụ dịpụrụ adịpụ
Nye iwu n'ime ime interface Loop Back, mfe mmezi ahịrị
Ebe nnyefe dị ihe ruru 2-120km na-enweghị nkwụsị
AC 220V, DC-48V, DC + 24V nwere ike ịbụ nhọrọ
DC-48V/DC+24V ike ọkọnọ na akpaka polarity nchọpụta ọrụ, mgbe arụnyere na-enweghị ọdịiche dị n'etiti nti na adịghị mma.

Oke

♦Fiber

Multi-mode Fiber

50/125, 62.5/125,

Ogologo nnyefe kacha elu: 5Km @ 62.5 / 125um fiber mode otu, attenuation (3dbm/km)

Ogologo ebili mmiri: 820nm

Ike nnyefe: -12dBm (Min) ~ -9dBm (Max)

Mmetụta nke nnata: -28dBm (Nkeji)

Ego njikọ: 16dBm

Otu ụdị Fiber

8/125, 9/125

Ogologo nnyefe kacha: 40Km

Ogologo nnyefe: 40Km @ 9 / 125um eriri ụdị otu, attenuation (0.35dbm/km)

Ogologo ebili mmiri: 1310nm

Ike nnyefe: -9dBm (Min) ~ -8dBm (Max)

Mmetụta nke nnata: -27dBm (Nkeji)

Ego njikọ: 18dBm

♦E1 interface

Interface Standard: soro protocol G.703;
Ọnụego ntanetị: 2048Kbps± 50ppm;
Koodu ihu: HDB3;

E1 impedance: 75Ω (unbalance), 120Ω (ntụziaka);

Nkwekọrịta Jitter: N'ikwekọ na protocol G.742 na G.823

Attenuation ekwenyere: 0 ~ 6dBm

♦Ebe ọrụ

Na-arụ ọrụ okpomọkụ: -10°C ~ 50°C

Iru mmiri na-arụ ọrụ: 5% ~ 95% (enweghị condensation)

Okpomọkụ nchekwa: -40°C ~ 80°C

Iru mmiri nchekwa: 5% ~ 95% (enweghị condensation)

Nkọwapụta

Nlereanya	Nọmba nlereanya:JHA-CPE4m
Nkọwa ọrụ	4E1 PDH, ịtụ ekwentị ekwentị, Desk-Top Type, (Standard ekwentị interface, na-abụghị ekwentị ejiri)
Nkọwa Port	Otu ọdụ ụgbọ mmiri, 4 E1 interface (75/120 ohms)
Ike	Ike ọkọnọ: AC180V ~ 260V;DC-48V;DC+24VIke oriri: ≤10W
Akụkụ	Nha ngwaahịa: Ụdị Desk-Top 216X138X41mm(WXDXH)
Ibu	1.25KG/PCS

Ngwa

75 ohm 4 * E1 PDH

120 ohm 4 * E1 PDH

Foto nkọwa ngwaahịa:

Ntuziaka ngwaahịa emetụtara:

Tinyere nkà ihe ọmụma obere azụmaahịa nke ndị ahịa, usoro njikwa dị elu siri ike, igwe na-emepụta nke ọma yana otu R&D dị ike, anyị na-enye ngwaahịa na ngwọta dị elu mgbe niile, ọrụ obi niile na ọnụ ahịa ike ike maka 2019 Good Quality Optical Terminal Pdh Multiplexer - 4E1 PDH Fiber Multiplexer JHA-CPE4m – JHA , The ngwaahịa ga-ezitekwara n'ụwa nile, dị ka: Romania, Guatemala, Nepal, N'ime obere afọ, anyị na-ejere ndị ahịa anyị ozi n'eziokwu dị ka Quality First, Integrity Prime, Delivery N'oge, nke na-akpatara anyị aha pụtara ìhè na nnukwu nlekọta ndị ahịa Pọtụfoliyo. Na-atụ anya ịrụ ọrụ na gị Ugbu a!