Zoo Zoo SFP Module – 10G Multimode 300m DDM | Dual Fiber SFP + Transceiver JHA3903D - JHA
Zoo Zoo SFP Module – 10G Multimode 300m DDM | Dual Fiber SFP + Transceiver JHA3903D - JHA Qhia:
Nta:
1). Txhawb 9.95 rau 11.3Gb/s ntsis tus nqi
2). Kub-Pluggable
3). Duplex LC connector
4). 850nm VCSEL transmitter, PIN yees duab ntes
5). MMF txuas mus txog 300m
6). 2-xaim interface rau kev tswj xyuas specifications
Ua raws li SFF 8472 digital diagnostic monitoring interface
7). Kev siv hluav taws xob: + 3.3V
8). Kev siv hluav taws xob
9). Qhov kub thiab txias: 0 ~ 70 ° C
10). Raws li RoHS
Daim ntawv thov:
1). 10GBASE-SR/SW Ethernet
2). SONET OC-192 / SDH
3). 10G Fiber Channel
Nqe lus piav qhia:
JHA3903D yog ib qho compact 10Gb/s optical transceiver module rau serial optical kev sib txuas lus daim ntaub ntawv ntawm 10Gb/s. JHA3903D hloov 10Gb / s serial hluav taws xob cov ntaub ntawv ntws mus rau 10Gb / s optical tso zis teeb liab thiab 10Gb / s optical input teeb liab rau 10Gb / s serial hluav taws xob cov ntaub ntawv ntws. Kev kub ceev 10Gb / s hluav taws xob interface yog ua raws li SFI specification.
Qhov kev ua tau zoo 850nm VCSEL transmitter thiab siab rhiab heev PIN receiver muab kev ua tau zoo tshaj plaws rau Ethernet daim ntawv thov txog li 300m txuas.
SFP + Module ua raws li SFF-8431, SFF-8432 thiab IEEE 802.3ae 10GBASE-SR. Digital diagnostics functions muaj nyob rau ntawm ib tug 2-xaim serial interface, raws li teev nyob rau hauv SFF-8472.
Daim ntawv ua raws li SFP tag nrho muab qhov kub pluggability, yooj yim kho qhov muag chaw nres nkoj hloov khoom dua tshiab thiab qis EMI emission.
•Qhov siab tshaj qhov ntsuas
| Parameter | Cim | Min. | Hom | Max. | Chav tsev |
| Cia kub | TS | -40 |
| +85 | °C |
| Case Kev Ua Haujlwm Kub | TA | 0 |
| 70 | °C |
| Maximum Supply Voltage | Vcc | -0.5 |
| 4 | V |
| txheeb ze humidity | RH | 0 |
| 85 | % |
•Cov yam ntxwv hluav taws xob (TON0 ~ 70 ° C, VCC = 3.135 txog 3.465V)
| Parameter | Cim | Min. | Hom | Max. | Chav tsev | Nco tseg |
| Cov khoom siv hluav taws xob | Vcc | 3.135 ib |
| 3.465 ib | V |
|
| Cov khoom siv tam sim no | Icc |
|
| 250 | mA |
|
| Kev siv fais fab | P |
|
| 1 | IN |
|
| Transmitter Tshooj: | ||||||
| Input sib txawv impedance | Rhauv |
| 100 |
| Oh | 1 |
| Tx Input Single Ended DC Voltage Tolerance (Ref VeeT) | V | -0.3 |
| 4 | V |
|
| Differential input voltage viav vias | Caw, p | 180 |
| 700 | mV | 2 |
| Transmit Disable Voltage | VD | 2 |
| Vcc | V | 3 |
| Transmit Enable Voltage | VIN | Dej |
| Dej + 0.8 | V |
|
| Tus txais Section: | ||||||
| Single Ended Output Voltage kam rau ua | V | -0.3 |
| 4 | V |
|
| Rx Output Qhov txawv voltage | Vo | 300 |
| 850 | mV |
|
| Rx tso zis nce thiab caij nplooj zeeg | Tr/Tf | 30 |
|
| ps | 4 |
| LUB Fault | VLOS txhaum | 2 |
| VccHOST | V | 5 |
| LOS Normal | VLOS standard | Dej |
| Dej + 0.8 | V | 5 |
Nco tseg:
- Txuas ncaj qha rau TX data input pins. AC coupling los ntawm pins rau laser tsav IC.
- Rau SFF-8431 Rev 3.0
- Nyob rau hauv 100 ohms sib txawv txiav.
- 20%~80%
- LOS yog qhib cov khoom tso tawm. Yuav tsum tau rub nrog 4.7k - 10kΩ ntawm lub rooj tsavxwm. Kev ua haujlwm li qub yog logic 0; poob ntawm cov teeb liab yog logic 1. Qhov siab tshaj plaws rub-up voltage yog 5.5V.
• Optical Parameters(TON= 0-70°C, VCC = 3.135 rau 3.465V)
| Parameter | Cim | Min. | Hom | Max. | Chav tsev | Nco tseg |
| Transmitter Tshooj: | ||||||
| Center Wavelength | lwj t | 840 ua | 850 | 860 ua | nm |
|
| RMS spectral dav | lRMS |
|
| 4 | nm |
|
| Nruab Nrab Optical Fais Fab | Pavg | -7.3 |
| -1 | dBm ib | 1 |
| Optical zog OMA | Poma |
| -1.5 |
| dBm ib |
|
| Laser Off Lub Zog | Poof |
|
| -30 | dBm ib |
|
| Extinction Ratio | YOG | 3.5 |
|
| dB |
|
| Transmitter Dispersion txim | TDP |
|
| 3.9 | dB | 2 |
| Kwv tij siv suab nrov | Kuj |
|
| -128 | dB/Hz | 3 |
| Optical Return Poob Tolerance |
| 20 |
|
| dB |
|
| Tus txais Section: | ||||||
| Center Wavelength | lr | 840 ua |
| 860 ua | nm |
|
| Tus neeg txais kev hnov mob (OMA) | Nws |
|
| -11.1 | dBm ib | 4 |
| Stressed Sensitivity (OMA) | NwsST |
|
| -7.5 | dBm ib | 4 |
| Los Assert | LUBA | -30 |
| - | dBm ib |
|
| Cov Khoom Qab Zib | LUBD |
|
| -12 | dBm ib |
|
| Los Hysteresis | LUBH | 0.5 |
|
| dB |
|
| Tshaj dhau | Sat | 0 |
|
| dBm ib | 5 |
| Txais Reflectance | Rrx |
|
| -12 | dB |
|
Nco tseg:
- Qhov nruab nrab lub zog cov nuj nqis yog cov ntaub ntawv tsuas yog, raws li IEEE802.3ae.
- TWDP daim duab xav kom lub rooj tswj hwm tus tswv yuav tsum ua raws SFF-8431. TWDP yog suav nrog Matlab code muab nyob rau hauv clause 68.6.6.2 ntawm IEEE802.3ae.
- 12dB kev xav.
- Cov xwm txheej ntawm kev ntsuam xyuas cov neeg txais kev ntxhov siab ib qho IEEE 802.3ae. Kev xeem CSRS xav kom lub rooj tsav xwm tswj hwm ua raws SFF-8431.
- Tus neeg txais kev tshaj tawm tau teev tseg hauv OMA thiab nyob rau hauv qhov kev ntxhov siab tshaj plaws.
•Tyam ntxwv
| Parameter | Cim | Min. | Hom | Max. | Chav tsev |
| TX_Disable Assert Time | t_off |
|
| 10 | peb |
| TX_Disable Negate Time | t_ yog |
|
| 1 | ms |
| Lub Sijhawm pib pib suav nrog rov pib dua TX_FAULT | t_ ib |
|
| 300 | ms |
| TX_FAULT los ntawm Fault to Assertion | t_fault |
|
| 100 | peb |
| TX_Disable Time to Start Reset | t_rov | 10 |
|
| peb |
| Txais Lub Sijhawm Tsis Muaj Teeb Meem Pom Zoo | TA, RX_LOS |
|
| 100 | peb |
| Txais Lub Sijhawm Tsis Muaj Teeb Meem Tsis Zoo | Td, RX_LOS |
|
| 100 | peb |
| Rate-Xaiv Lub Sijhawm | t_ratesel |
|
| 10 | peb |
| Serial ID Lub Sijhawm Sijhawm | t_serial moos |
|
| 100 | kHz |
•Pin Assignment
Daim duab ntawm Lub Rooj Tswjhwm Saib Cov Khoom Txuas Thaiv Tus lej PIN thiab Lub Npe
•PinMuaj nuj nqi txhais
| PIN # | Lub npe | Muaj nuj nqi | Sau ntawv |
| 1 | VeeT | Module transmitter hauv av | 1 |
| 2 | Tx Fault | Module transmitter txhaum | 2 |
| 3 | Tx Disable | Transmitter Disable; Tua tawm transmitter laser tso zis | 3 |
| 4 | SDL | 2 hlau serial interface cov ntaub ntawv tawm tswv yim / tso zis (SDA) |
|
| 5 | SCL | 2 hlau serial interface moos input (SCL) |
|
| 6 | ANTI-ABS | Module Absent, txuas rau VeeR lossis VeeT hauv module | 2 |
| 7 | RS 0 | Rate xaiv 0, xaiv tau tswj SFP + receiver. Thaum siab, cov ntaub ntawv nkag siab> 4.5Gb / s; Thaum qis, cov ntaub ntawv nkag |
|
| 8 | LUB | Receiver Poob qhov taw qhia | 4 |
| 9 | RS 1 | Rate xaiv 0, xaiv tau tswj SFP + transmitter. Thaum siab, cov ntaub ntawv nkag siab> 4.5Gb / s; Thaum qis, cov ntaub ntawv nkag |
|
| 10 | VeeR | Module txais av | 1 |
| 11 | VeeR | Module txais av | 1 |
| 12 | RD- | Receiver inverted cov ntaub ntawv tawm tso |
|
| 13 | RD+ | Tus neeg txais cov ntaub ntawv uas tsis hloov pauv |
|
| 14 | VeeR | Module txais av | 1 |
| 15 | VccR | Module receiver 3.3V mov |
|
| 16 | VccT | Module transmitter 3.3V mov |
|
| 17 | VeeT | Module transmitter hauv av | 1 |
| 18 | TSO + | Transmitter inverted cov ntaub ntawv tawm tso |
|
| 19 | TD- | Transmitter tsis-inverted cov ntaub ntawv tawm tso |
|
| 20 | VeeT | Module transmitter hauv av | 1 |
Nco tseg:
- Lub module hauv av pins yuav tsum tau cais tawm ntawm cov ntaub ntawv module.
- Tus pin no yog ib qho qhib collector/drain output tus pin thiab yuav tsum rub nrog 4.7K-10Kohms rau Host_Vcc ntawm lub rooj tsavxwm.
- Tus pin no yuav tsum rub nrog 4.7K-10Kohms rau VccT hauv qhov module.
- Tus pin no yog ib qho qhib collector/drain output tus pin thiab yuav tsum rub nrog 4.7K-10Kohms rau Host_Vcc ntawm lub rooj tsavxwm.
•SFP ModuleEEPROM Cov Ntaub Ntawvthiab Management
SFP modules siv 2-wire serial kev sib txuas lus raws tu qauv raws li tau teev tseg hauv SFP -8472. Cov ntaub ntawv serial ID ntawm SFP modules thiab Digital Diagnostic Monitor tsis tuaj yeem nkag mus tau los ntawm I2C interface ntawm qhov chaw nyob A0h thiab A2h. Lub cim xeeb yog mapped hauv Table 1. Cov ncauj lus kom ntxaws ID (A0h) muaj nyob rau hauv Table 2. Thiab DDM specification ntawm qhov chaw nyob A2h. Yog xav paub ntxiv ntawm daim ntawv qhia nco thiab cov ntsiab lus byte, thov xa mus rau SFF-8472, "Digital Diagnostic Monitoring Interface for Optical Transceivers". Cov kev ntsuas DDM tau raug ntsuas sab hauv.
Table 1.Daim Ntawv Qhia Digital Diagnostic Memory Map (Cov Ntaub Ntawv Qhia Tshwj Xeeb)
Rooj 2- EEPROM Serial ID Nco Cov Ntsiab Lus (Ahh)
| Cov Ntaub Ntawv Chaw Nyob | Ntev (Byte) | Lub npe ntawm Ntev | Nqe lus piav qhia thiab cov ntsiab lus |
| Base ID Fields | |||
| 0 | 1 | Tus cim | Hom Serial transceiver (03h = SFP) |
| 1 | 1 | Khaws tseg | Extended identifier ntawm hom serial transceiver (04h) |
| 2 | 1 | Txuas | Code ntawm optical connector hom (07 = LC) |
| 3-10 | 8 | Transceiver | 10G Base-SR |
| 11 | 1 | Encoding | 64B/66B |
| 12 | 1 | BR, npe | Nominal baud tus nqi, chav tsev ntawm 100Mbps |
| 13-14 | 2 | Khaws tseg | (0000h) |
| 15 | 1 | Ntev (9um) | Txuas ntev txhawb rau 9/125um fiber ntau, units ntawm 100m |
| 16 | 1 | Ntev (50um) | Txuas ntev txhawb rau 50/125um fiber ntau, units ntawm 10m |
| 17 | 1 | Ntev (62.5um) | Txuas ntev txhawb rau 62.5 / 125um fiber ntau, units ntawm 10m |
| 18 | 1 | Ntev (Copper) | Txuas ntev txhawb rau tooj liab, units ntawm meters |
| 19 | 1 | Khaws tseg | |
| 20-35 : kuv | 16 | Tus neeg muag khoom npe | SFP tus neeg muag khoom lub npe: JHA |
| 36 | 1 | Khaws tseg | |
| 37-39 : kuv | 3 | Vendor YOG | SFP transceiver vendor OUI ID |
| 40-55 : kuv | 16 | Tus neeg muag khoom PN | Qauv Zauv: “JHA3903D” (ASCII) |
| 56-59 : kuv | 4 | Vendor Rev | Hloov kho qib rau ntu tus lej |
| 60-62 : kuv | 3 | Khaws tseg | |
| 63 | 1 | CCID | Yam tsawg kawg nkaus byte ntawm cov ntaub ntawv hauv chaw nyob 0-62 |
| Extended ID Fields | |||
| 64-65 : kuv | 2 | Kev xaiv | Qhia qhov twg optical SFP teeb liab raug siv(001Ah = LOS, TX_FAULT, TX_DISABLE all supported) |
| 66 | 1 | BR, max | Upper ntsis tus nqi margin, units ntawm % |
| 67 | 1 | BR, min | Tsawg tus nqi qis dua, cov units ntawm % |
| 68-83 : kuv | 16 | Tus neeg muag khoom SN | Serial tooj (ASCII) |
| 84-91 : kuv | 8 | Hnub tim code | JHA's Manufacturing date code |
| 92-94 : kuv | 3 | Khaws tseg | |
| 95 | 1 | CCEX | Tshawb xyuas cov lej rau qhov txuas ntxiv ID Fields (chaw nyob 64 txog 94) |
| Tus neeg muag khoom tshwj xeeb ID Fields | |||
| 96-127 : kuv | 32 | Nyeem tau | JHA hnub tshwj xeeb, nyeem nkaus xwb |
| 128-255 : kuv | 128 | Khaws tseg | Reserved rau SFF-8079 |
•Digital Diagnostic Monitor Cov yam ntxwv
| Cov Ntaub Ntawv Chaw Nyob | Parameter | Qhov tseeb | Chav tsev |
| 96-97 : kuv | Transceiver Internal Temperature | ± 3.0 | °C |
| 98-99 : kuv | VCC3 Internal Supply Voltage | ± 3.0 | % |
| 100-101 : kuv | Laser Bias Tam sim no | ± 10 | % |
| 102-103 : kuv | Tx Output Power | ± 3.0 | dBm ib |
| 104-105 : kuv | Rx input zog | ± 3.0 | dBm ib |
•Txoj Cai Ua Raws Cai
JHA3903D ua raws li thoob ntiaj teb Electromagnetic Compatibility (EMC) thiab thoob ntiaj teb kev nyab xeeb cov cai thiab cov qauv (saib cov ntsiab lus hauv qab no).
| Electrostatic paug(ESD) rau Cov Hluav Taws Xob Pins | MIL-STD-883ETxoj Kev 3015.7 | Chav Kawm 1 (> 1000V) |
| Electrostatic paug (ESD)mus rau Duplex LC Receptacle | IEC 61000-4-2: Tus Qauv ZauvGR-1089-COV | Tau tshaj cov qauv |
| ElectromagneticKev cuam tshuam (EMI) | FCC Part 15 Chav Kawm BEN55022 Class B (CISPR 22B)VCCI Class B | Tau tshaj cov qauv |
| Laser Qhov Muag Kev Nyab Xeeb | FDA 21CFR 1040.10 thiab 1040.11EN60950, EN (IEC) 60825-1,2 | Tau tshaj Class 1 laserkhoom. |
•Pom zoo Circuit Court
Pom zoo Host Board Power Supply Circuit
Pom zoo High-speed Interface Circuit Court
•Mechanical Dimensions
JHA muaj txoj cai los hloov pauv cov khoom lossis cov ntaub ntawv muaj nyob ntawm no yam tsis muaj ntawv ceeb toom. Tsis muaj kev lav phib xaub yog suav tias yog vim lawv siv lossis thov. Tsis muaj cai nyob rau hauv ib qho patent nrog kev muag khoom ntawm cov khoom lossis cov ntaub ntawv.
Luam tawm los ntawm Shenzhen JHA Technology Co., Ltd
Copyright © Shenzhen JHA Technology Co., Ltd
All Rights Reserved
Product details duab:
Yam khoom Guide:
Feem ntau cov neeg siv khoom taw qhia, thiab nws yog peb lub hom phiaj zoo tshaj plaws los ua tsis yog tsuas yog lub npe nrov, ntseeg siab thiab ncaj ncees, tab sis kuj yog tus khub rau peb cov neeg siv khoom rau Zoo Zoo SFP Module - 10G Multimode 300m DDM | Dual Fiber SFP + Transceiver JHA3903D - JHA, Cov khoom yuav muab rau thoob plaws lub ntiaj teb no, xws li: Saudi Arabia, Palestine, Philippines, Yog li peb tseem ua haujlwm tsis tu ncua. peb, tsom ntsoov rau kev ua tau zoo, thiab paub txog qhov tseem ceeb ntawm kev tiv thaiv ib puag ncig, ntawm cov khoom lag luam tsis muaj kuab paug, kev daws teeb meem zoo ib puag ncig, rov siv dua ntawm kev daws teeb meem. Peb tau hloov kho peb cov catalog, uas qhia peb lub koom haum. n nthuav dav thiab npog cov khoom tseem ceeb uas peb muab rau tam sim no, Koj tuaj yeem tuaj xyuas peb lub vev xaib, uas suav nrog peb cov khoom lag luam tsis ntev los no. Peb tos ntsoov rau reactivating peb lub tuam txhab kev twb kev txuas.
Los ntawm Marco los ntawm Belarus - 2017.10.13 10:47 Nrog rau tus cwj pwm zoo ntawm kev xav txog kev ua lag luam, saib cov kev cai, hais txog kev tshawb fawb, lub tuam txhab ua haujlwm nquag ua haujlwm tshawb fawb thiab kev loj hlob. Cia siab tias peb muaj kev sib raug zoo ntawm kev lag luam yav tom ntej thiab ua tiav kev sib koom ua ke.
By Frank los ntawm Berlin - 2017.02.28 14:19 
