High reputation Active Optical Cable - 10G SFP+ Active Optical cable JHA-SFP-10G-AOC – JHA
High reputation Active Optical Cable - 10G SFP+ Active Optical cable JHA-SFP-10G-AOC – JHA Detail:
Features
◊ Support 10GBASE-SR/10G Fiber Channel application
◊ Compliant to SFP+ Electrical MSA SFF-8431
◊ Compliant to SFP+ Mechanical MSA SFF-8432
◊ Multi rate of up to 11.3Gbps
◊ Transmission distance up to 300m
◊ +3.3V single power supply
◊ Low power consumption
◊ Operating case temp Commercial: 0°C to +70 °C
◊ RoHS compliant
◊ Password protection for A0h and A2h
Applications
◊ 10GBASE-SR at 10.31Gbps
◊ InfiniBand QDR, SDR, DDR
◊ Other optical links
Specification:
Absolute Maximum Ratings
Table1- Absolute Maximum Ratings
Parameter | Symbol |
Min. |
Typical | Max. | Unit | Notes |
Supply Voltage | Vcc3 |
-0.5 |
- | +3.6 | V | |
Storage Temperature | Ts |
-10 |
- | +70 | °C | |
Operating Humidity | RH |
+5 |
- | +85 | % | 1 |
Receiver Damage Threshold | P Rdmg |
+3.4 |
- | - | dBm |
Note1: No condensation
Recommended Operating Conditions
Table 2- Recommended operating Conditions
Parameter | Symbol | Min. | Typical |
Max. |
Unit | Notes |
Operating Case Temperature | TC | 0 | - |
+70 |
°C | |
Power Supply Voltage | Vcc | 3.14 | 3.3 |
3.47 |
V | |
Power Supply Current | Icc | - | - |
150 |
mA | |
Power Dissipation | Pd | - | - |
0.6 |
W | |
Bit Rate | BR | - | 10.3125 | - | Gbps | |
Fiber Bend Radius | Rb | 3 | - | - | cm |
Electrical Characteristics
Table 3- Electrical Characteristics
Parameter | Symbol | Min. | Typ. |
Max. |
Units | Notes | |
Transmitter |
|||||||
Differential Data Input Swing | Vin,P-P | 200 | - | 1600 | mVPP | ||
Input Differential Impedance | ZIN | 90 | 100 | 110 | Ω | ||
Tx_Fault | Normal Operation | VOL | 0 | - | 0.8 | V | |
Transmitter Fault | VOH | 2.0 | - | VCC | V | ||
Tx_Disable | Normal Operation | VIL | 0 | - | 0.8 | V | |
Laser Disable | VIH | 2.0 | - | VCC+0.3 | V | ||
Receiver | |||||||
Differential Date Output | Vout | 370 | - |
1600 |
mV | ||
Output Differential Impedance | ZD | 90 | 100 |
110 |
Ω | ||
Rx_LOS | Normal Operation | VOL | 0 | - |
0.8 |
V | |
Lose Signal | VoH | 2.0 | - |
VCC |
V |
Optical Characteristics
Table 4-Optical Characteristics
Parameter | Symbol |
Unit |
Min | Typ | Max | Notes |
Optical transmitter Characteristics | ||||||
Data Rate | DR |
Gbps |
9.953 | 10.3125 | 11.3 | |
Center Wavelength Range | λc |
nm |
820 | 850 | 880 | |
Laser Off Power | Poff |
dBm |
- | - | -45 | |
Launch Optical Power | P0 |
dBm |
-6.0 |
- |
- |
1 |
Extinction Ratio | ER | dB | 3 |
- |
- |
|
Spectral Width(RMS) | RMS |
nm |
- |
- |
0.45 |
|
Optical Receiver Characteristics | ||||||
Data Rate | DR |
Gbps |
9.953 | 10.3125 | 11.3 | |
Bit Error Rate | BER |
dBm |
- | - | E-12 | 2 |
Overload Input Optical | PIN |
dBm |
2.4 | - | - | 2 |
Power | ||||||
Center Wavelength Range | λc |
nm |
820 |
- |
880 | |
Receiver Sensitivity inAverage Power |
Sen |
dBm |
- |
- |
-9.9 | 3 |
Los Assert |
LosA |
dBm |
-26 |
- |
- | |
Los De-Assert |
LosD |
dBm |
- |
- |
-12 | |
Los Hysteresis |
LosH |
dB | 0.5 |
- |
- |
Note:
- Coupled into 50/125 MMF.
- Measured with PRBS 231-1 test pattern @10.3125Gbps.BER=10E-12
Recommended Host Board Power Supply Circuit
Figure 1, Recommended Host Board Power Supply Circuit
Recommended Interface Circuit
Figure 2, Recommended Interface Circuit
Pin arrangement
Figure 3, Pin View
Table 5-Pin Function
Definitions
Pin | Symbol | Name/Description | Notes |
1 | VEET | Module Transmitter Ground | 1 |
2 | TX_FAULT | Module Transmitter Fault | 2 |
3 | TX_DISABLE | Transmitter Disable; Turns off transmitter laser output | 3 |
4 | SDA | 2-Wire Serial Interface Data Line (MOD-DEF2) | |
5 | SCL | 2-Wire Serial Interface Clock (MOD-DEF1) | |
6 | MOD_ABS | Module Absent, connected to VEET or VEER in the module | 2 |
7 | RS0 | Rate Select 0, optionally controls SFP+ module receiver | |
8 | RX_LOS | Receiver Loss of Signal Indication (In FC designated as Rx_LOS and in Ethernet designated as NOT Signal Detect) | 2 |
9 | RS1 | Rate Select 1, optionally controls SFP+ module transmitter | |
10 | VEER | Module Receiver Ground | 1 |
11 | VEER | Module Receiver Ground | 1 |
12 | RD- | Receiver Inverted Data Output | |
13 | RD+ | Receiver Non-Inverted Data Output | |
14 | VEER | Module Receiver Ground | 1 |
15 | VCCR | Module Receiver 3.3 V Supply | |
16 | VCCT | Module Transmitter 3.3 V Supply | |
17 | VEET | Module Transmitter Ground | 1 |
18 | TD+ | Transmitter Non-Inverted Data Input | |
19 | TD- | Transmitter Inverted Data Input | |
20 | VEET | Module Transmitter Ground | 1 |
Note:
- The module ground pins are isolated from the module case.
- The pins shall be pulled up with 4.7K-10Kohms to a voltage between 3.14V and 3.46V on host board.
- The pin is pulled up to VCCT with a 4.7K-10KΩ resistor in the module.
Monitoring Specification
Figure 4, Memory Map
Mechanical Design Diagram
Unit:mm
Table 6- Cable
Length
Cable Length L(Unit: m) | Tolerant(Unit: cm) |
≤1.0 | +5/-0 |
1.0<L≤4.5 | +15/-0 |
4.5<L≤14.5 | +30/-0 |
>14.5 | +2%/-0 |
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD).A static free environment is highly recommended. Follow guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
Product detail pictures:
Related Product Guide:
Our goods are broadly recognized and reliable by users and can meet consistently switching financial and social demands of High reputation Active Optical Cable - 10G SFP+ Active Optical cable JHA-SFP-10G-AOC – JHA , The product will supply to all over the world, such as: Slovenia, United Kingdom, Pretoria, Immediate and expert after-sale service supplied by our consultant group has happy our buyers. Comprehensive Info and parameters from the merchandise will probably be sent to you for any comprehensive acknowledge. Free samples may be delivered and company check out to our corporation. n Morocco for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.
By Maxine from Lahore - 2017.02.28 14:19
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By Madeline from The Swiss - 2017.09.26 12:12