Kyakkyawar Module na SFP - 155M Single Mode 40Km DDM | Single Fiber SFP Transceiver JHA-5240D-35 - JHA
Kyakkyawar Module na SFP - 155M Single Mode 40Km DDM | Juyin Juya Fiber SFP Transceiver JHA-5240D-35 - JHA Cikakken Bayani:
Siffofin:
♦ Har zuwa 155Mb/s Data Links
♦ Hot-Pluggable
♦ Mai haɗin SC guda ɗaya
♦ Har zuwa 40 km akan 9/125μm SMF
♦ 1310nm FP Laser watsawa
♦ 1550nm Mai gano hoto na PIN
♦ Samar da Wutar Lantarki guda ɗaya + 3.3V
♦ Kulawa da Ƙwararren Ƙwararren Ƙwararru tare da SFF-8472
♦ Matsakaicin Ƙarfi
♦ Masana'antu / Extended / Kasuwancin zafin jiki na aiki: -40 ° C zuwa 85 ° C / - 5 ° C zuwa 85 ° C / - 0 ° C zuwa 70 ° C akwai samuwa
♦ RoHS mai yarda da Jagorar Kyauta
Aikace-aikace:
♦ SONET OC-3/SDH STM-1
♦ Fast Ethernet
♦ Sauran Hanyoyin Haɗin Kai
Bayani:
JHA'sJHA5240D-35 Transceivers babban aiki ne, ƙirar ƙira mai tsada waɗanda ke da ƙirar LC optics guda ɗaya. Sun dace da Yarjejeniyar Yarjejeniya Mai Sauƙi Mai Sauƙi (MSA) da kuma ayyukan bincike na Dijital ta hanyar bas ɗin serial na waya 2 da aka ƙayyade a cikin SFF-8472. Sashen mai karɓa yana amfani da mai karɓar PIN kuma mai watsawa yana amfani da laser 1310 nm FP, har zuwa 29dB haɗin haɗin gwiwa ya tabbatar da wannan tsarin SONET OC-3 / SDH STM -1 40km aikace-aikace.
•Cikakkun Mahimman Kima
| Siga | Alama | Min. | Na al'ada | Max. | Naúrar |
| Ajiya Zazzabi | TS | -40 |
| +85 | °C |
| Samar da Wutar Lantarki | VCC | -0.5 |
| 4 | V |
| Danshi na Dangi | RH | 0 |
| 85 | % |
•NasihaMuhallin Aiki:
| Siga | Alama | Min. | Na al'ada | Max. | Naúrar | |
| Yanayin aiki Case | Masana'antu | TC | -40 |
| 85 | °C |
| Ya kara | -5 |
| 85 | °C | ||
| Kasuwanci | 0 |
| +70 | °C | ||
| Samar da Wutar Lantarki | VCC | 3.135 |
| 3.465 | V | |
| Kawo Yanzu | Icc |
|
| 300 | mA | |
| Inrush Yanzu | Ikaruwa |
|
| Icc+30 | mA | |
| Matsakaicin Ƙarfi | Pmax |
|
| 1 | IN | |
•Halayen Lantarki (TON= -40 zuwa 85°C, VCC = 3.135 zuwa 3.465V)
| Siga | Alama | Min. | Na al'ada | Max. | Naúrar | Lura |
| Sashin watsawa: | ||||||
| Input bambanci impedance | Rin | 90 | 100 | 110 | IN | 1 |
| Ƙarshen shigar da bayanai guda ɗaya | Vin PP | 250 |
| 1200 | mVp-p |
|
| Canjawa Kashe Wutar Lantarki | VD | Vcc - 1.3 |
| Vcc | V | 2 |
| Canza Wutar Lantarki | VIN | Ruwa |
| Ruwa + 0.8 | V |
|
| Canjawa Kashe Lokacin Sayarwa | Tkayan zaki |
|
| 10 | mu |
|
| Sashin mai karɓa: | ||||||
| Juyin fitar da bayanai guda ɗaya | Wato, pp | 300 |
| 800 | mv | 3 |
| Laifi | Vhasara | Wutar lantarki - 0.5 |
| VCC_mai masaukin baki | V | 5 |
| LOS Na al'ada | Vnorsm | Viya |
| Viya+0.5 | V | 5 |
| Ƙin Samar da Wuta | PSR | 100 |
|
| mVpp | 6 |
Lura:
- AC haɗe.
- Ko bude da'ira.
- A cikin 100 ohm bambancin ƙarewa.
- 20-80%
- LOS shine LVTTL. Logic 0 yana nuna aiki na al'ada; dabaru 1 yana nuna ba a gano sigina ba.
- Duk ƙayyadaddun bayanai na transceiver sun dace da tsarin wutar lantarki na sinusoidal na 20 Hz zuwa 1.5MHz har zuwa ƙayyadaddun ƙima da aka yi amfani da su ta hanyar hanyar sadarwa ta tace wutar lantarki da aka nuna a shafi na 23 na Yarjejeniyar Mai Rushewar Maɗaukaki Mai Rushewa (MSA) , Satumba 14, 2000.
•Ma'aunin gani (TON= -40 zuwa 85°C, VCC = 3.135 zuwa 3.465V)
| Siga | Alama | Min. | Na al'ada | Max. | Naúrar | Lura |
| Sashin watsawa: | ||||||
| Tsawon Tsayin Tsakiya | lc | 1270 | 1310 | 1600 | nm |
|
| Spectral Nisa(RMS) | pRMS |
|
| 4 | nm |
|
| Ƙarfin fitarwa na gani | Pfita | -5 |
| 0 | dBm | 1 |
| Lokaci Tashi/Faɗuwar gani | tr/tf |
|
| 2 | ns | 2 |
| Rabon Kashewa | IS | 10 |
|
| dB |
|
| Generated Jitter (kololuwa zuwa kololuwa) | JTXpp |
|
| 0.07 | UI | 3 |
| Generated Jitter (rms) | JTXrms |
|
| 0.007 | UI | 3 |
| Mashin ido don Fitar gani | Mai yarda da G.957(laser aminci class 1) | |||||
| Sashin mai karɓa: | ||||||
| Tsawon Input Na gani | lc | 1530 | 1550 | 1570 | nm |
|
| Yawaitar mai karɓa | Pol | -8 |
|
| dBm | 4 |
| Hankalin RX | Its |
|
| -34 | dBm | 4 |
| RX_LOS Tabbatarwa | THEA | -45 |
|
| dBm |
|
| RX_LOS Tsare-tsare | THED |
|
| -35 | dBm |
|
| RX_LOS Hysteresis | THEH | 0.5 |
|
| dB |
|
| Gabaɗaya Bayani: | ||||||
| Adadin Bayanai | BR |
| 155 |
| Mb/s |
|
| Yawan Kuskuren Bit | BER |
|
| 10-12 |
|
|
| Max. Tsawon Haɗin Yana goyan baya akan 9/125μm SMF@155Mb/s | LMAX |
| 40 |
| km |
|
| Jimlar Tsarin Kasafin Kudi | LB | 29 |
|
| dB |
|
Lura
- An ƙaddamar da ƙarfin gani a cikin SMF.
- 20-80%.
- Ma'aunin Jitter da aka ɗauka ta amfani da Agilent OMNIBERT 718 daidai da GR-253.
- An auna tare da PRBS 27-1ku 10-12BER
•Pin Assignment
Hoton Hoton Mai Haɗin Gidan Mai Runduna Toshe Fin Lambobi da Suna
Hoton Lambobin Fil da Sunaye Mai Haɗin Gidan Mai watsa shiri
•PinMa'anar Aiki
| Pin No | Suna | Aiki | Toshe Seq | Bayanan kula |
| 1 | VeeT | Filin watsawa | 1 | 1 |
| 2 | Laifin TX | Alamar Laifin watsawa | 3 |
|
| 3 | A kashe TX | Kashe mai watsawa | 3 | 2 |
| 4 | MOD-DEF2 | Ma'anar Module | 2 | 3 |
| 5 | MOD-DEF1 | Ma'anar Module 1 | 3 | 3 |
| 6 | MOD-DEF0 | Ma'anar Module 0 | 3 | 3 |
| 7 | Zaɓi Zaɓi | Ba a Haɗe ba | 3 | 4 |
| 8 | THE | Asarar sigina | 3 | 5 |
| 9 | VeeR | Ƙasar Mai karɓa | 1 | 1 |
| 10 | VeeR | Ƙasar Mai karɓa | 1 | 1 |
| 11 | VeeR | Ƙasar Mai karɓa |
| 1 |
| 12 | RD- | Inv. Data Karɓi Fitar | 3 | 6 |
| 13 | RD+ | Data Karɓi Fitar | 3 | 6 |
| 14 | VeeR | Ƙasar Mai karɓa | 3 | 1 |
| 15 | VccR | Ikon Mai karɓa | 2 | 1 |
| 16 | VccT | Ikon watsawa | 2 |
|
| 17 | VeeT | Filin watsawa | 1 |
|
| 18 | TD+ | Isar da Bayanai A | 3 | 6 |
| 19 | TD- | Inv. Isar da In | 3 | 6 |
| 20 | VeeT | Filin watsawa | 1 |
|
Bayanan kula:
- Ƙasar da'ira ta keɓe a ciki daga ƙasan chassis.
- Ana kashe fitarwar Laser akan TDIS>2.0V ko buɗe, kunna akan TDIS
- Ya kamata a ja sama tare da 4.7k - 10 kohms akan hukumar gudanarwa zuwa ƙarfin lantarki tsakanin 2.0V da 3.6V. MOD_DEF(0) yana jan layi ƙasa don nuna an toshe module a ciki.
- Ba a amfani da zaɓin ƙimar
- LOS buɗaɗɗen fitarwa ce mai tarawa. Ya kamata a ja sama tare da 4.7k - 10 kohms akan hukumar gudanarwa zuwa ƙarfin lantarki tsakanin 2.0V da 3.6V. Logic 0 yana nuna aiki na al'ada; dabaru 1 yana nuna asarar sigina.
- AC Haɗe
•Module na SFPBayanin EEPROMda Gudanarwa
Samfuran SFP suna aiwatar da ka'idar sadarwar serial na waya 2 kamar yadda aka ayyana a cikin SFP-8472. Za a iya samun damar bayanan serial ID na samfuran SFP da sigogin Dijital Diagnostic Monitor ta hanyar I2C dubawa a adireshin A0h da A2h. An tsara ƙwaƙwalwar ajiya a cikin Table 1. An jera cikakken bayanin ID (A0h) a cikin Table 2. Kuma ƙayyadaddun DDM a adireshin A2h. Don ƙarin cikakkun bayanai na taswirar ƙwaƙwalwar ajiya da ma'anar byte, da fatan za a koma zuwa SFF-8472, "Interface Monitoring Diagnostic Interface for Optical Transceivers". An daidaita sigogin DDM na ciki.
Tebur 1.Taswirar Ƙwaƙwalwar Ƙwaƙwalwar Dijital (Takamaiman Bayanin Filin Bayanai)
Table 2- EEPROM Serial ID Abubuwan Ƙwaƙwalwar Ƙwaƙwalwa (Ahh)
| Adireshin Bayanai | Tsawon (Byte) | Sunan Tsawon | Bayani da Abubuwan da ke ciki |
| Filin ID na tushe | |||
| 0 | 1 | Mai ganowa | Nau'in Serial transceiver (03h=SFP) |
| 1 | 1 | Ajiye | Extended mai gano nau'in transceiver serial (04h) |
| 2 | 1 | Mai haɗawa | Lambar nau'in haɗin gani na gani (07=LC) |
| 3-10 | 8 | Transceiver | |
| 11 | 1 | Rufewa | NRZ (03h) |
| 12 | 1 | BR, mai suna | Matsakaicin adadin baud, naúrar 100Mbps |
| 13-14 | 2 | Ajiye | (0000h) |
| 15 | 1 | Tsawon (9um) | Tsawon haɗin haɗin yana goyan bayan 9/125um fiber, raka'a na 100m |
| 16 | 1 | Tsawon (50um) | Tsawon haɗin haɗin yana goyan bayan 50/125um fiber, raka'a na 10m |
| 17 | 1 | Tsawon (62.5um) | Tsawon haɗin haɗin yana goyan bayan 62.5/125um fiber, raka'a na 10m |
| 18 | 1 | Tsawon (Copper) | Tsawon mahaɗin yana goyan bayan jan ƙarfe, raka'a na mita |
| 19 | 1 | Ajiye | |
| 20-35 | 16 | Sunan mai siyarwa | Sunan mai siyarwa na SFP: JHA |
| 36 | 1 | Ajiye | |
| 37-39 | 3 | Mai sayarwa YES | OUI ID mai siyar SFP |
| 40-55 | 16 | Mai sayarwa PN | Lambar Sashe: "JHA5240D-35" (ASCII) |
| 56-59 | 4 | Mai siyarwa Rev | Matakin bita don lambar sashi |
| 60-62 | 3 | Ajiye | |
| 63 | 1 | CCID | Mafi ƙarancin mahimmin byte na jimlar bayanai a adireshi 0-62 |
| Faɗin Faɗin ID | |||
| 64-65 | 2 | Zabin | Yana nuna waɗanne siginonin SFP na gani aka aiwatar(001Ah = LOS, TX_FAULT, TX_DISABLE duk ana goyan baya) |
| 66 | 1 | BR, max | Babban tazarar ƙimar bit, raka'a na % |
| 67 | 1 | BR, min | Ƙarƙashin ƙimar kuɗi kaɗan, raka'a na % |
| 68-83 | 16 | Mai sayarwa SN | Serial number (ASCII) |
| 84-91 | 8 | Lambar kwanan wata | Lambar kwanan wata masana'anta ta JHA |
| 92-94 | 3 | Ajiye | |
| 95 | 1 | CCEX | Bincika lambar don filayen ID mai tsayi (adireshi 64 zuwa 94) |
| Takamaiman Filin ID na Mai siyarwa | |||
| 96-127 | 32 | Ana iya karantawa | JHA takamaiman kwanan wata, karanta kawai |
| 128-255 | 128 | Ajiye | An ajiye don SFF-8079 |
•Halayen Kula da Ganewar Dijital
| Adireshin Bayanai | Siga | Daidaito | Naúrar |
| 96-97 | Zazzabi na Ciki Mai Canjawa | ± 3.0 | °C |
| 98-99 | VCC3 Wutar Lantarki na Ciki | ± 3.0 | % |
| 100-101 | Laser Bias Yanzu | ± 10 | % |
| 102-103 | Ƙarfin Fitar da Tx | ± 3.0 | dB |
| 104-105 | Ƙarfin shigar da Rx | ± 3.0 | dB |
•Yarda da Ka'ida
TheJHA5240D-35 ya bi daidai da daidaitattun Electromagnetic Electromagnetic (EMC) da buƙatun aminci na ƙasa da ƙasa da ƙa'idodi (duba cikakkun bayanai a Tebu mai zuwa).
| Fitar da Electrostatic(ESD) zuwa Wutar Lantarki | MIL-STD-883EHanyar 3015.7 | Darasi na 1 (> 1000V) |
| Fitar da Electrostatic (ESD)zuwa Single SC Receptacle | Saukewa: IEC61000-4-2GR-1089-CORE | Mai jituwa tare da ma'auni |
| ElectromagneticTsangwama (EMI) | FCC Kashi na 15 Darasi na BEN55022 Class B (CISPR 22B)Babban darajar VCCI | Mai jituwa tare da ma'auni |
| Tsaron Idon Laser | FDA 21CFR 1040.10 da 1040.11EN60950, EN (IEC) 60825-1,2 | Mai jituwa tare da Laser Class 1samfur. |
•Da'irar da aka ba da shawarar
Mai watsa shiri na SFP ya Shawarar da'ira
lGirman Injini
Zane Injiniya
Hotuna dalla-dalla samfurin:
Jagoran Samfuri masu alaƙa:
Tare da manyan fasahar mu a lokaci guda kamar ruhun ƙirƙira, haɗin gwiwar juna, fa'idodi da haɓaka, za mu gina kyakkyawar makoma tare da babban kamfanin ku don Kyakkyawan Tsarin SFP Module - 155M Single Mode 40Km DDM | Single Fiber SFP Transceiver JHA-5240D-35 – JHA , The samfurin zai wadata ga ko'ina cikin duniya, kamar: Kazakhstan, Lebanon, Los Angeles, m R & D injiniya iya zama a can for your shawarwari da sabis kuma za mu yi kokarin mu saduwa da ku bukatun. Don haka ya kamata ku ji daɗin tuntuɓar mu don tambayoyi. Za ku iya aiko mana da imel ko kira mu don ƙananan kasuwanci. Hakanan kuna iya zuwa kasuwancinmu da kanku don ƙarin sanin mu. Kuma tabbas za mu gabatar muku da gamsasshen magana da sabis na siyarwa. A shirye muke mu gina kwanciyar hankali da zumunci tare da 'yan kasuwanmu. Don cimma nasarar juna, za mu yi ƙoƙarinmu don gina ingantaccen haɗin gwiwa da aikin sadarwa na gaskiya tare da abokanmu. Fiye da duka, muna nan don maraba da tambayoyinku game da kowane kayan cinikinmu da sabis ɗinmu.
By Laura daga Nairobi - 2018.04.25 16:46 Muna matukar farin cikin samun irin wannan masana'anta wanda ke tabbatar da ingancin samfur a lokaci guda farashin yana da arha sosai.
Daga Maureen daga Ghana - 2018.09.29 17:23 
