1 10/100TX and 1 100X SFP Slot | Mini Industrial Media Converter JHA-IFS11C

Short Description:

2-port Industrial Media Converter, with 1-port 100Base-X SFP Slot and 1-port 10/100Base-T(X)


Overview

Download

Features

♦ Support 1 100Base-X SFP slot and 1 10/100Base-T(X) Ethernet port.

♦ Designed to fit into space-limited camera enclosure, can also be used as DIN-Rail mounted or panel mounted unit.

♦ Support Link Fault Pass Through(LFP), converter mode and switch mode.

♦ Industrial chip design, 15kV ESD protection, 8kV surge protection.

♦ DC5-60V and AC18-36V redundancy power.

♦ IP40 Rated aluminum alloy housing, -40-85°C operating temperature.

Introduction

JHA-IFS11C is a true mini, rugged industrial media converter, it is designed for where critical but space limited outdoor camera enclosure. It can be powered by wide range of VAC , VDC or external DC power adapter, power input (DC5-60V & AC18-36V). With its multi-purpose design, it can also be used for DIN-Rail or wall-mounted. It is an ideal unit for IP surveillance, traffic monitoring and security application in critical environment.

JHA-IFS11C supports 1-port 100Base-X SFP slot and 1 port 10/100Base-T(X). It supports CE, FCC, RoHS standard, rugged high-strength metal case. The switch support IEEE802.3, IEEE802.3u, IEEE802.3x with 10/100Base-T(X). The -40 - 85℃ operating temperature can meet all kinds of industrial environment requirement, providing reliable and economic solution for your industrial Ethernet network.

Specification

 

Protocol Standard

IEEE802.3, IEEE802.3u, IEEE802.3x

Flow Control

IEEE802.3x flow control, back press flow control

Switching Performance

Forwarding Rate: 0.446MppsTransmission Mode: Store and ForwardPacket Buffer Size: 1MSystem Exchange Bandwidth: 0.6Gbps

MAC Table Size: 1K

Delay Time: < 3μs

Ethernet Port

10/100Base-T(X) auto speed control, full/half duplex and MDI/MDI-X auto-adaptation

Fiber Port

100Base-X SFP slot

LED Indicator

Power Indicator: PWRFiber Port Indicator: SDFiber Signal Indicator: LK / ACT

DIP Switch

Link Fault Pass Through(LFP)Converter Mode, Switch Mode

Power Supply

Input Voltage: DC5-60V and AC18-36VConnector: 3 bit 5.08mm removable terminal blockFull Load: <2WProtection Mechanism: overload protection, reverse connection protection, redundancy protection

Mechanical Structure

Shell: IP40 protection, aluminum-alloy housingDimension: 59*36*49mm( L*W*H )Weight: 150gInstallation: DIN-Rail mounting, wall mounting

Operating Environment

Operating Temperature: -40 - 75°CStorage Temperature: -40 - 85°CAmbient Relative Humidity: 5% - 95% (non-condensing)

Industry Standards

EMI:FCC Part 15 Subpart B Class A, EN 55022 Class AEMS:EN61000-4-2 (ESD), Level 4 at 15kV(Air), 8kV(Contact)EN61000-4-3 (R/S), Level 3 at 10V/mEN61000-4-4 (EFT), Level 4 at 4kV(Power Port), 2kV(Date Port)

EN61000-4-5 (Surge), Level 4 at 4kV

EN61000-4-6 (CS), Level 3 at 10V/m

EN61000-4-8, Level 5 at 100A/m

Shock:IEC 60068-2-27

Free Fall:IEC 60068-2-32

Vibration:IEC 60068-2-6

Certification

CE, FCC, RoHS

MTBF

>100,000 Hours

Warranty

5-years

  • Previous:
  • Next:

  • Write your message here and send it to us